Hi Guys, I have 33' dish and conxsat receiver. I have already installed in the direction given by dish pointer and seems ok . I am getting 80 % signal but no quality . I need your help.
happy new year r for cnx nano2 its little different than my kbox rec, here should be settinng, for 118.8 and 119 for sat 118.8 diseqc 2 tp freq 11715 lnb 10750 22khz off, multiswitch off ,,lnb on f for 119 diseqc 2 tp freq 12,239 lnb 10750 lnb power on, rest of options of.
I got it yesterday was testing kbox before i also have 33" dish. I didnt change anythin i was using fir kbox. Just go to menu - channel scan and scan type select blind scan . You wont see channels or quality right away however after 2., 3 mints u will notice quality came back
You said: "i have tested on 61.5w it worked" "one wire from LNB connected to receiver"
I take it that you did change the Dish's direction after finding that it worked scanning 61.5. And after changing the direction you are saying you are pointing to 118.7W. Is that correct?
Well i have first tested receiver on my old dish (small) which was pointed to 61.5 and it worked but after that i have removed old dish and installed new 33inch dish for 118.8/119. New dish pointed towards 118.8 and signal is 80% but no quality ..so how should i resolve this issue?
Most likely as Chumley said, you are not properly aimed. 118.7W - Anik F3 has weaker signals. First try to scan 119, with DisEqC 1 if you are connected via switch and connected to port 1 (the usual one) or with setting of None. Use LNB setting Universal (9750-10750) if Standard or single (11250) does not work. For Anik F3 scanning you need to use Single or Standard with a frequency of 10750 or 10600. Try Blind scan or manually install all the TPs from Lyngsat.
I do not know Conax receiver, but with IKS, sometimes you do not have network connection established. With kbox I got around it once by resetting the hub while connected to the Internet. Your router should be set to do DHCP service.
Ok after some realignment of dish ..i got 3 channels ...2 3ABN channels ..1 of them is english and other one is in latino..3 rd one is AGHAPY TV..Signal quality is 95% and quality is 0..
Sada ..i donot know that's what i am trying to find out..i have directed dish towards 118.8 no qullity but signal strength is 95%..i have coxsat receiver...do you know or have channel file which can be upload ? so i will know right away if i'm on right direction...becuase conxsat will not tell quality right away