Help With BUD Adapting

 

New member
Username: B0ng0

Post Number: 6
Registered: Mar-08
I have a 10' BUD set up for C-band now that I used back in the VC1 days. I want to adapt it to my CNX Duo or CS 6k and utilize the large dish/better signal and programable arm movement feature instead of buying all new stuff. Am I nuts or is this possible with basic tech skills?
 

Silver Member
Username: Chumley

Post Number: 698
Registered: Dec-08
? Have existing receiver move dish and scan with the new receiver ?

Upload
 

Bronze Member
Username: Boss_hog

Post Number: 86
Registered: Oct-08
Upload
Upload


Nalin Nyda
Platinum Member
Username: Nydas

Post Number: 16614
Registered: Jun-06
Posted on Friday, November 13, 2009 - 07:34 pm:

--------------------------------------------------------------------------------
Don't buy that antique.
Everybody buys a 4 to 1
DisEqC switch these days - costs 2- 8 dollars.

antique. your azz, the only antique. here is you.
 

Platinum Member
Username: Nydas

Post Number: 16623
Registered: Jun-06
Chumley:
I think you have already proven in your diagram above, that you are fossilised in useless all information.
 

Bronze Member
Username: Bigspud

Post Number: 62
Registered: Sep-06
use a dmx741u lnbf

http://shop.ebay.com/i.html?_nkw=dmx741u&_armrs=1&_from=&_ipg=

and a powertech v3000 positioner box.

http://shop.ebay.com/?_from=R40&_trksid=m38&_nkw=V3000+Sadoun

these will make using ur bud so much easier, with ur fta mpeg box.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us