NALIN /PLYMOUTH Frequencies,AVID and PVID of all indian pakistani channels

 

New member
Username: Kashif786

Post Number: 2
Registered: Dec-08
Kindly provide AVID PVID and frequencies of all indian and pakistani channels to manually add on kbox for satellite 118W.

I am missing most of the channels.

My quality is 60% and level is 80%

Thanks in Advance
 

Gold Member
Username: Saqeeb9000

Post Number: 6053
Registered: Oct-07
http://www.lyngs*at.com/packages/dish119.html

remove *
 

New member
Username: Kashif786

Post Number: 3
Registered: Dec-08
Thanks sada, but why my sertain TP's has less signal and quality then others, should i adjust the dish for these tps or whats the solution
 

Gold Member
Username: Saqeeb9000

Post Number: 6057
Registered: Oct-07
dish problem...
adjust the dish from outside.. if u can't get some channels... i mean if signal strenth is too low...

and it will be fine....
 

New member
Username: Kashif786

Post Number: 4
Registered: Dec-08
Thanks dear appreciate your prompt reply.
 

Silver Member
Username: Moe948

Post Number: 121
Registered: Jun-06
Some tps WILL have lower quality than others, that's completely normal. That's because quality distribution over TPs is not uniform. The TP on 118 that has lowest quality for me is the one that has star plus on it, around 56%. Other ones have quality around 60-80%.
 

New member
Username: Kashif786

Post Number: 5
Registered: Dec-08
Moe, In my case i just have 20% and red instead of green, i readjusted the dish got every thing except zee starplus and sony, I dont know what to do, any suggestions?
 

Silver Member
Username: Sump

Post Number: 390
Registered: Aug-09
how big is the dish?

what brand LNB

what model number of switches in the line ?
 

Platinum Member
Username: Nydas

Post Number: 16172
Registered: Jun-06
kashif mohammad: For 118W you need two VERY essential items.
1. A 33" Dish
2. A sepcial LNB designed specifically for 118/119 reception.
 

New member
Username: Kashif786

Post Number: 6
Registered: Dec-08
Thnaks for your reply Nalin and others, I do have

1. 33'' dish

2. Dual circuler LNB

the level is around 80% and the quality is around 60%, Goot all the chanels on 119 and most of the 118 except zee, starplus and sony.
any suggestions?
 

Platinum Member
Username: Nydas

Post Number: 16174
Registered: Jun-06
Name on LNB?
You have to scan with LNB frequency of 10750 or less.
 

New member
Username: Kashif786

Post Number: 7
Registered: Dec-08
Information on LNB is ;

TWIN CIRCULER LNBF
I.F: 11.7-12.75GHZ
LO:10.75GHZ
NF:0.3dB (TYP)


my satellite setting is as under;

ECHOSTAR 118WEST
11.8W DISH ANIK F3

ON
SINGLE
10.750
OFF
DISEQ=4
OFF
OFF

LEVEL=86
QUALITY=66
 

Platinum Member
Username: Nydas

Post Number: 16175
Registered: Jun-06
You have the correct LNB for 118W.
Set the
LNB type to Standard or Universal 2,
LNB Freq 10750 or 9750-10750
and try Blind scan with each of these settings.
Zee TV is at TP 12002(H)
Sony Entertainment TV is at TP 12033 (H)
 

New member
Username: Lk__lives

Post: 100mil...

Post Number: 10
Registered: Sep-09
Hi Rosebud
 

Bronze Member
Username: El_toro_the_great

NC USA

Post Number: 86
Registered: Jul-09
kashif mohammad
In my case i just have 20% and red instead of green, i readjusted the dish got every thing except zee starplus and sony, I dont know what to do, any suggestions?


kashif mohammad try these settings.
Set the PID values to search
...............................V/PID................A/PID
Zee TV USA .......... 5666................5667

SET USA ................4898................ 4899

Star Plus USA .........5922 ................5923

After setting the PID values, press OK key.
 

New member
Username: Kashif786

Post Number: 8
Registered: Dec-08
Thanks for your reply, i would do that but i dont have good quality on these channels frquencies (TP 12002 for zee and 12033 for sony). So when i start scanning by putting these setting its just start scanning and stop in few seconds.

because for me the quality has to be good to do scanning and get certain channels.
Could you plz tell me on these channels what is your quality and level?

Thanks in advance.
 

Silver Member
Username: Sump

Post Number: 395
Registered: Aug-09
you may need to tweek the dish just a bit ..

if you set the dish and have high quality on the strongest TP you will not get the weakest .. you'll need to sacrafice a little Q&A on the strongest to get better on the weakest ..
 

Bronze Member
Username: El_toro_the_great

NC USA

Post Number: 91
Registered: Jul-09
Thanks for your reply, i would do that but i dont have good quality on these channels frquencies (TP 12002 for zee and 12033 for sony). So when i start scanning by putting these setting its just start scanning and stop in few seconds.

That is because the receiver can't locate these two TPs

because for me the quality has to be good to do scanning and get certain channels.
True, not only for you, but for everyone

Could you plz tell me on these channels what is your quality and level? Sorry I don't do any IKS maybe someone near your location can answer that.


On these two TPs if the above don't work
try this---delete all the channels on 12002
then do a TP scan only on tp 12002 and
then do one TP scan only on 12033
 

Platinum Member
Username: Nydas

Post Number: 16178
Registered: Jun-06
kashif mohammad: Look at:

http://www.lyngsat*com/packages/dish119.html

See the channel list of channels with TP freq of less than 12002, if you are getting these properly, than you do not have alignment or LNB problem.

If your receiver allows a "Blind Scan" do a blind scan with a setting like this:
LNB type Universal 2
LNB freq 9750-10750
 

New member
Username: Kashif786

Post Number: 9
Registered: Dec-08
Sure Nalin I will try this , and let you know.Thanks
 

New member
Username: Kashif786

Post Number: 10
Registered: Dec-08
I tried every thing you guys said, i am not getting any channels on certain TP's where the signal is in red and around 20%, so channels like starplus, zee, sony, b4u, are missing on the other hand i am watching imagine, geo, geo news, ary, ary news, aag, zee cinema, b4u music.

1)should i realign the dish? the quality is around 75%.

2)The 119 my quality is 97%.and getting all of the channels.

3)If i moved the dish at this point there are chances i will lose some of the channels i am watching on 118 and 119.

Seeking expert advice at this point.

Thanks in advance
 

Silver Member
Username: Sump

Post Number: 413
Registered: Aug-09
Hmm... did not try everything that was suggested ..

************************************
you may need to tweek the dish just a bit ..

if you set the dish and have high quality on the strongest TP you will not get the weakest .. you'll need to sacrafice a little Q&A on the strongest to get better on the weakest ..
 

Platinum Member
Username: Nydas

Post Number: 16190
Registered: Jun-06
Moving the Dish is likely to make you lose what you have. let us see if Sada has any input in this matter.
 

Bronze Member
Username: Kashif786

Post Number: 11
Registered: Dec-08
I elevated the dish little up and got most of my missing channels except Zee and Starplus.

Any body with kbox pro(with 33 inches dish or less), kindly give me your setting for starplus and Zee channels on 118 along with level and quality.

Thanks in Advance
 

Gold Member
Username: Saqeeb9000

Post Number: 6073
Registered: Oct-07
kashif there are no advance setting.. i mean for star plus... or zee cinema..

its all about level and quality...
i do infact some times miss some channels once there is high wind / etc..
and slight dish move help me to get the channels back...
so just tweak ur dish little bit...

what kind of level and quality u get on 118.8 west,
what i mean is when u go to menu dish 118.8 west what do u get for level and quality ,
if u have above 65 % chances are u will get all the channels...

there is also other option in kbox under setting , it turns on beep , so u can adjust the dish this way u don't have to watch the tv, and go back to roof , u can just listen to tune and when u will have good signals it will have fine tune, so u know that signals are good,
33 inch dish is just fine... just tweak it up little bit and u will get the channels that u are missing.
 

Bronze Member
Username: Kashif786

Post Number: 12
Registered: Dec-08
Thanks for your detailed answer , I realy appreciated. I think i have to try to get around 95% quality and then will be able to get my remaining channels also.

I will let you know, Thanks again.
 

Bronze Member
Username: Kashif786

Post Number: 13
Registered: Dec-08
i have tried the manual scan of each TP of Star plus and got it, so as of now i am getting all of the indian pakistani channels including the new pakistani channel TVone, the only missing channel is ZEE.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us