Dish 500

 

Silver Member
Username: Jowhar

Post Number: 292
Registered: Jun-06
Hey I would like to know if I can use dish 500 on bell.91 and 83.Thanks.
 

Platinum Member
Username: Plymouth

Canada

Post Number: 10184
Registered: Jan-08
lucky

Yes you can use this dish for 91 and 82.
 

Silver Member
Username: Jowhar

Post Number: 293
Registered: Jun-06
Thanks Plymouth.
 

Platinum Member
Username: Nydas

Post Number: 15617
Registered: Jun-06
Yes - and if you have a two-eyed LNB that was scanning 119/110, (nine degrees apart), You can just swing it to get 91/82 (also nine degrees apart). You might need a minor elevation adjustment.
 

Silver Member
Username: Jowhar

Post Number: 294
Registered: Jun-06
Thanks Nalin
 

Bronze Member
Username: Brampton_on

Post Number: 70
Registered: Nov-06
do we need a different switch or the same disq with the double eye lnb with dish 500 will work for both 91 and 82 with the fta's ie kbox for me .
I was told that double original dish lnb will not work correctly with fta receivers with the usual fta switch. i know that if i use both 82 and 91 a lot of freezing does occur. and when i switch from sat to sat it tells me bad or no signal then after a little while signal comes back. but if i use either 82 or 91 indvidually then the problem goes to 25%
 

Platinum Member
Username: Nydas

Post Number: 15628
Registered: Jun-06
If you have the Dish "the double eye lnb", you are better off using a DP34 or even better using DP44, because of the powering issues with DP34 and FTA.
A DP44 has four inputs for LNBs and four outputs for for receivers.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us