hi, i found the 91w nimiq1 ku signal just fine, but when i scan, there are no channels being found at all. i have a nfusion phoenix with an 18" dish and ku-band lnbf LO:11.25GHZ. can anybody help me solve this problem? thanks
with all those settings and signal 71/quality 85 on 91w nimiq1, still no channels being scanned. i do have 119/110 previously scanned in there if that makes a difference. is there anything more i have to do with the settings?
i did a factory default to start fresh, got signal 75/quality 82 on 91w nimiq1 ku. did a channel scan and still no channels come up on scanning. doesn't make much sense to me. does anydody know what the problem could be? thanks
thanks for the info, but i can't see to find that signal. 110 and 119 i can get so easily, but 91 i can't seem to find. i guess i will just keep trying. any other info you can give would be greatly appreciated. thanks
so if i am in toronto, the dish setup to face west and locked onto 110. how much higher up and do i turn the dish to the left or the right? and by how much approx to hit 91 nimiq1? thanks
If you are in back of dish, you turn the LNB arm towards the east, if you look over the dish, turn anticlockwise. A full rotation is 360 degrees, you must turn 18 degrees.
