What can be wrong with smart equipment?

 

New member
Username: Lerika

Post Number: 6
Registered: Feb-08
Bought KBox pro with KHub, loaded everything, connected KHub directly to high speed modem, but still does not work on D110. Advertising canals are working, in menu network settings shows MODULE IS NOT CONNECTED.
 

Gold Member
Username: Saqeeb9000

Post Number: 5623
Registered: Oct-07
first question, what is the light on khub
just reboot the khub
did u activate ur khub,
when u go to menu, and on network, on top does it has a file number etc..
 

Gold Member
Username: Saqeeb9000

Post Number: 5624
Registered: Oct-07
one more thing u need to connect khub to router,
not modem...
that can be the problem
 

New member
Username: Lerika

Post Number: 7
Registered: Feb-08
I connected to router too,green light is blinking red and orange not.
 

Gold Member
Username: Saqeeb9000

Post Number: 5625
Registered: Oct-07
did u try this ..


Version 2.01 (June 25, 2009)

KHub activation from receiver:

-copy KHub.rom to USB drive
-with KHub attached to receiver, power on
-Go to Menu: Utilities> Data Transfer> USB Explorer
_select KHub.rom and press OK


http://www.ftabins.net/showthread.php?p=537718#post537718


they made ur life easy now.,..
just download this on ur usb and follow the instructions. posted above..
no need to download factory crap
 

New member
Username: Lerika

Post Number: 8
Registered: Feb-08
But I can not find KHub.rom in USB Explorer
 

Gold Member
Username: Saqeeb9000

Post Number: 5626
Registered: Oct-07
the file that is posted 2.01,
that's the one i am talking about,
make sure ur kub is connected to ur rec,
 

New member
Username: Lerika

Post Number: 9
Registered: Feb-08
I did it, may be I need something else?
 

Gold Member
Username: Saqeeb9000

Post Number: 5628
Registered: Oct-07
menu, option, network,
what is message u are getting
there is button there for factory reset
press it...
 

New member
Username: Lerika

Post Number: 10
Registered: Feb-08
no message at all
 

Gold Member
Username: Saqeeb9000

Post Number: 5629
Registered: Oct-07
u have to press enter on network
it should says connection mode dhcp
and on bottom it should says connection ok
or some kind of message
on top of dhcp it should says version number
it also says for factory reset press red button,so do that..
 

Bronze Member
Username: Lerika

Post Number: 11
Registered: Feb-08
on the bottom-MODULE IS NOT CONNECTED, on the top nothing about version number. I pressed red button and nothing changed.
 

Gold Member
Username: Saqeeb9000

Post Number: 5632
Registered: Oct-07
turn off ur modem
wait 30 sec,
turn on ur modem,
then turn on ur wireless router,
wait few minutes
and see if that works,
one more thing under option mode should be network
make sure u have latest file,
did u download the file that i mentioned above did it worked,?
also try to download
download the older bin
http://www.ftabins.net/showthread.php?t=97360
if it says modem not connected, most likely its the serial port that is not connnected in back that goes from ur khub to ur rec,
one is power button the other one is for network cable , the last one is for serial cable which goes from ur khub to k1plus...
 

Bronze Member
Username: Lerika

Post Number: 13
Registered: Feb-08
THANK you Sada. I will try.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us