Team VS up to something ?
|
Bronze Member Username: Scott21Post Number: 73 Registered: Sep-07 | I was looking at the home page of ftahq and they have "awaiting for n3 files " so dose this mean anything might be happening from them ? there is also a new thread from Cyphris on there also and he is saying something big is coming |
|
Gold Member Username: SatgrlDil Mei DarD a Jaga ... Post Number: 1766 Registered: Oct-07 | everyone says they are waiting so what the heck;0) |
|
Silver Member Username: Tgyoung1Illinois U.s.a. Post Number: 197 Registered: Jul-06 | be nice blacklist was up to something..lol |
|
Gold Member Username: TapemanNew York Citay in-HD, NY Post Number: 4321 Registered: Oct-06 | Even if they do break N3 which I don't think they will Only HD receivers can get it with an add on DVB Tuner to match DN HD 1080p FTA tuners won't work on recent DN massive upgraded hardware Only way to get around N3 is IKS but still with an entirely different tuners Most mods on all FTA sites don't know sh!t about hardware Yo can take my words to the bank |
|
Gold Member Username: RiconissanPost Number: 1182 Registered: Feb-09 |  |
|
Gold Member Username: PlymouthCanada Post Number: 9669 Registered: Jan-08 | King Viewsat is ready for it, just wait again and you will see, this thechnology is known and available for many receiver manufacturers.  |
|
Gold Member Username: TapemanNew York Citay in-HD, NY Post Number: 4322 Registered: Oct-06 | Well I'm glad that yor confidant that they are ready |
|
Bronze Member Username: InsiderFast lane, Good times Post Number: 19 Registered: Apr-09 | You are all forgetting that N2 was not hacked but purchased! Am I right or wrong? |
|
Gold Member Username: PlymouthCanada Post Number: 9672 Registered: Jan-08 | Here is few spec info on new Viewsat receiver but not confirmed. Viewsat 2000 Ethernet Some preliminary technical specifications: -Fully DVB-S/S2 compliant -950MHz - 2150MHz tuning range -QPSK/8PSK ready (no need for adapters!) -Channel symbol rates of 45MSps (QPSK) and 30MSps (8PSK) -MPEG2/MPEG4/H.264 compression -10/100 Base-T Ether Jack -600 MHz Conexant processor -1 PCI slot -4 USB slots  |
|
Bronze Member Username: InsiderFast lane, Good times Post Number: 20 Registered: Apr-09 | http://www.wnd.com/index.php?fa=PAGE.view&pageId=100283 |
|
Gold Member Username: PlymouthCanada Post Number: 9673 Registered: Jan-08 | Hi Tiger! |
|
Bronze Member Username: AdirondakPost Number: 76 Registered: Mar-08 | Hi All, sooo much N3 info being thrown around.... what to take in is overwhelming at best. bottom line.... will my VS extreme work once N3 is cracked?? Although, it's just a matter of time... maybe, greed.... (simply put, the demand-for cracked tv exceeds current supply... it has happened before and will repeat itself again, again, and again...) Is it my choice of receiver that will determine my viewing in 6 months?? |
|
Silver Member Username: PicanhaEast LA Post Number: 471 Registered: Jun-08 |  |
|
Bronze Member Username: AdirondakPost Number: 77 Registered: Mar-08 | .... typical. |
|
Gold Member Username: PlymouthCanada Post Number: 9674 Registered: Jan-08 | Adirondak VS Extreme not sure, maybe because this receiver doesn't have much memory and the processor is a little bit slow. |
|
Bronze Member Username: AdirondakPost Number: 78 Registered: Mar-08 | ahh... understood. any suggestions as to products that will fit the requirements? Is this IKS dependency avoidable, aside from actually subscribing to Charlie? |
|
Gold Member Username: TapemanNew York Citay in-HD, NY Post Number: 4324 Registered: Oct-06 | "VS extreme work once N3 is cracked??" Answer is simply no for D#N VSX like many other MPEG2 receivers can't decode the newly upgraded MPEG4 platform by D#N Plymouth: "-Fully DVB-S/S2 compliant " I know I can read the specs I remain skeptic D#N raised their SD sample rate to 5Mbps I assumed they'll do 1080p tuners This will put them by themselves as the only broadcasters in 1080p Yo can ask around if anyone else came up with a 1080p tuner So why would it be same as DVBs1 or DVBs2 tuners? Wouldn't yo think that 1080p would have to be a totally different tuner? Think carefully |
|
Gold Member Username: PlymouthCanada Post Number: 9679 Registered: Jan-08 | King This have nothing to do with tuner, but Decoder and video card.  |
|
Gold Member Username: TapemanNew York Citay in-HD, NY Post Number: 4326 Registered: Oct-06 | so 1080p can be decoded as 1080i? on same tuner? I guess we'll see who is right about that |
|
Bronze Member Username: AdirondakPost Number: 79 Registered: Mar-08 | so if the mp4 platform is the new standard, if I want to continue using VS, I should consider upgrading to VS Ultra, right!? sorry to sound like such a noob, I'm learning.... |
|
Gold Member Username: PlymouthCanada Post Number: 9691 Registered: Jan-08 | Adirondak No the Ultra will not work but a HD receiver like the VS MaxHD does work. The new VS 2000 Ethernet can work too but we wait, it seems to be sell this month but it is only rumor for now. |
|
Gold Member Username: PlymouthCanada Post Number: 9692 Registered: Jan-08 | King It seem your are blind between tuner and decoder, if you consider the decoder inside the tuner, i can understand your point of view but the tuner splitt the frequency like the transponder and the decoder split the packets identifiers and a second decoder decode the encrypted channels then a Video/audio ship provide the picture and sound. |
|
Silver Member Username: PicanhaEast LA Post Number: 474 Registered: Jun-08 |  |
|
Gold Member Username: TapemanNew York Citay in-HD, NY Post Number: 4328 Registered: Oct-06 | Tuner is the analog frequency pointer Mpeg4 is an encapsolated MPEG2 Audio Video Carier (AVC) H.264 But 30 true frames per second In 60 fields Known as interlaced 1080i But 1080p are 60 frames per second in 60 fields Progressive scan non-interlaced So it's another level above interlaced Can not and will not be decoded by 1080i DVB And even if the FTA receiver was built for 1080p an additional DVB tuner has to be added in one of the add on slots as in AZbox If an encapsolated signal is encoded in 1080p Only 1080p can decoded 1080i decoder won't be compatible Only with an add on hardware Forgetta bout 420i standard FTA receivers That's what most people expecting one day they'll work on DN And that's not gonna happen Don't take my words as a gospel Google it for yorself |
|
Gold Member Username: TapemanNew York Citay in-HD, NY Post Number: 4329 Registered: Oct-06 | Read this section http://en.wikipedia.org/wiki/1080p Keep in mind my definitions usually more accurate |
|
Gold Member Username: GregrafPost Number: 2962 Registered: Dec-07 |  |
|
Silver Member Username: PicanhaEast LA Post Number: 475 Registered: Jun-08 |    |
|
Gold Member Username: RiconissanPost Number: 1190 Registered: Feb-09 | They may send all the signals mpeg 4 some day. Also needing 1080p. But the fact is that has nothing to do with what is happening now. A new card in a sub stb is not giving you the ability to process 1080p. |
|
Gold Member Username: RiconissanPost Number: 1191 Registered: Feb-09 |  |
|
Gold Member Username: GregrafPost Number: 2963 Registered: Dec-07 |  |
|
Silver Member Username: PicanhaEast LA Post Number: 476 Registered: Jun-08 |  |
|
Gold Member Username: RiconissanPost Number: 1193 Registered: Feb-09 |  |
|
Bronze Member Username: ApplebeesPost Number: 88 Registered: Oct-08 |  |
|
New member Username: Lk_livesPost: 100mil... Post Number: 1 Registered: Jun-09 |  |
|
Gold Member Username: Donnie1973Post Number: 3187 Registered: May-06 | king, if an HD reciever is all that could be needed with an add on board (i agree on that), big deal. i am glad to see u are open to Fta (pta) cracking n3. i know they talked it up in ur morning meetings at the DN corp office and really made it sound like it was going to be unbreakable... you should quit DN and post here all day every day like some others. ;) |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2894 Registered: Dec-06 | NO!!! |
|
Gold Member Username: LolPost Number: 1449 Registered: Sep-06 | when Viewsats are up that is sumthing |
|
New member Username: DannydamanPost Number: 1 Registered: Dec-08 | MPEG4 has nothing to do with 1080p... MPEG4 is a means for more channels to be broadcatsted per transponder. It has nothing to do with HD. |
|
Gold Member Username: PlymouthCanada Post Number: 9710 Registered: Jan-08 | dannydaman You are right! That's what I try to explain to King, the screen format 1080i or 1080p is provide by audio/video chip. |
|
Gold Member Username: RiconissanPost Number: 1205 Registered: Feb-09 | Doreen LOL! dannydamam you dare dispute KING? Ha Ha. Plymouth yes I believe the HD card can be upgraded. But that is not the problem now. It is ONLY the N3 code as you can see the IKS are getting without Mpeg4. |
|
Gold Member Username: PlymouthCanada Post Number: 9714 Registered: Jan-08 | Rico No the actual problem is N3, the improve king says can take 2 years to be completed. |
|
Gold Member Username: TapemanNew York Citay in-HD, NY Post Number: 4333 Registered: Oct-06 | Do yo actually think I'm the one who is confused between 1080i and 1080p? MPEG4 can be 1080i or 1080p All standard broadcasters on earth are doing 1080i So as all FTA manufacturers I'm telling yo DN is doing 1080p MPEG4 1080p won't work on a regular HD FTA receiver Who is confused now? I |
|
Gold Member Username: PlymouthCanada Post Number: 9716 Registered: Jan-08 | King All good new Tv set are out with 1080P now, everybody work on it since over 1 year now. Do you realy think the receiver manufacturers are not ready? |
|
Gold Member Username: RiconissanPost Number: 1209 Registered: Feb-09 | King Tapeman Gold Member Username: Tapeman New York Citay in-HD, NY Post Number: 4333 Registered: Oct-06 "I'm telling yo DN is doing 1080p MPEG4 1080p won't work on a regular HD FTA receiver Who is confused now? " King DN cannot only send 1080p MPEG4 because they do not have all the STB to subs that can handle it. That day will come but Nfusion and Kbox are seeing these channels. |
|
Gold Member Username: RiconissanPost Number: 1210 Registered: Feb-09 | Are you saying that Kbox can handle mpeg4? 1080p? Show some proof that DN is Sending these signals in both formats. Today. With all due respect my friend. |
|
New member Username: DannydamanPost Number: 2 Registered: Dec-08 | Beat it..... Providres dont have enough bandwidth to push 1080i... Come on guy... Answer one question. Do any TV providers push 1080i? Cable or SAT?I must give you credit you nailed it with "Pushing 1080p". Do you remember when you first watched an HD channle on SAT on cable? No matter the method/encryption source you are watching 1080p and 720i is what you are gettingi - if that(some providers like the greenback). To this day you are not watching 1080p - 1080i HD TV....... |
|
New member Username: DannydamanPost Number: 3 Registered: Dec-08 | Also to answer your question RICO: If you have an HD rec then you're in good shape |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2896 Registered: Dec-06 | I have an HD TV using Viewsat Xtreme . I don't get "HD" quality because my receiver isn't an HD reciever. But I do believe that any FTA reciever will work when N3 comes out you just wont get the HD picture quality unless you buy an HD reciever. I pay for bev which is now all N3 but my receiver isn't HD. I can still watch TV!!! That all I gotta say on this matter. |
|
Gold Member Username: PlymouthCanada Post Number: 9717 Registered: Jan-08 | This receiver from China is ready  lDW-8622TS2CI High Definition Terrestrial & Satellite Receiver Profile: DW8622TS2CI is a High end digital satellite receiver with STpowerful single chip processor Sti7100.Supportting H.264 MPEG4 It provides two slot common interface for Conax, Cryptoworks, Irdeto,Mediag uard, Nagravision, SECA, Viaccess, NDS, etc a-- Fully DVB-T & MPEG-2 compliant. a-- Fully DVB-S DVBS-2 compliant. a-- Multi Bandwidth selection: 6M 7M & 8M a-- Multi demodulation selection: QPSK,QAM16, QAM64. a-- MEPG-4 MEPG-2 HD/SD decoding (MP@HL/ML) a-- Dolby AC-3 or MPEG-1 audio decoding a-- Down-mixes 5.1 AC3 to two channels encoded with Dolby Prologic Surround a-- YPbPr Output: 1080i/720p/576p a-- VGA output: supporting 1080i/720p/576p a-- CVBS and S-VIDEO output: PAL/NTSC/SECAM a-- HD Video Output:DVI or DVI-plus(1080i/720p/576p) a-- Conversion between SD programs and HD programs a-- Teletext (VBI & OSD output) a-- Subtitle (OSD output) a-- Aspect ratio: 4:3/16:9 a-- 3000 Editable Channels. a-- LNB Switching by 13/18V,0/12V,0/22KHz a-- Easy to Switch from DVB-T to DVB-S channels. a-- Dolby 5.1 channel or PCM digital audio output a-- Electronic program guide (EPG) a-- Parental guidance a-- Software upgrade via Rs232 a-- 32 bits true color on screen display (OSD) a-- Channel and Program editor a-- Multi-language User Interface a-- Beautiful casing, with easy to use front panel System Resources - CPU/MPU/Mainchip: Sti7100 266Mhz - Flash memory: 8MB - DDR RAM 64MB+64MB Tuner and Channel -S Tuner - RF loopthrough connector: F-type, IEC 169-24, female - Input frequency range: 950 to 2150 MHz - Signal level: -25 to -75 dBm - Modulation: DVB-S2 (QPSK & 8PSK) - Bandwidth: upto 36MHz - LNB Power & Polarisation: Vertical: +13.5V Horisontal: +18V Max current: 500 mA with overload protection - 22 KHz tone Frequency: 22 +/-4KHz Amplitude: 0.6 +/-0.2 V - DiSEqC: 1.0, 1.2, USALS compatible -T Tuner - SHARP high sensitive tuner - Input Frequency Range : 174i½z860MHz VHF & UHF - IF Bandwidth : 6,7 or 8MHz - Input Signal Level : i¼82i½zi¼20dBm - RF Input Connector: IEC169i¼2 type - RF Output Connector : IEC Type - Input impedance : 75I© De-module Mode - Modulation mode : COFDM (Code Orthogonal Frequency Division Multiplexing) - Demodulation : QPSKi¼QAM16i¼QAM64 - Mode : 2Ki¼8K - Guard interval : 1/4,1/8,1/16,1/32 - Code rate : 1/2,2/3,3/4,5/6,7/8 Video & Audio: - Transport stream: ISO/IEC 13818-1 (MPEG-2 system) - Video decoding: ISO/IEC 13818-2 (MPEG-2 video) MP@HL, ISO/IEC 14496-10 MPEG-4 AVC/H.264 HP@L4 - Video format: 4:3, 16:9 Letterbox - Video output: HDMI/DVI, CVBS, RCA - Video resolution: 1080p, 720p, 576p, 480p, 1080i, 576i, 480i - Audio decoding:ISO/IEC 13818-3 (MPEG-2 audio / MUSICAM), Dolby AC-3, Dolby Digital+ - Audio mode: single / dual mono / stereo / joint stereo AUX A/V input - Video RCA: 1 input - Audio RCA: 2 input (left and right) A/V output - Digital output: HDMI/DVI - HDOutPut: YPbPr - SPDIF: (optical) and captial - TV SCART: Video output (CVBS, RGB, S-Video) Audio output (resolution: 20 bits DAC, Max. 2Vrms) Vidieo output: CVBS - Audio output resolution: 20 bits DAC, Max. 2Vrms - Video RCA: 1 output - Audio RCA: 2 output (left and right) - Digital audio: 1 optical S/PDIF and 1 Coaxial Data Port - RS-232C 9 pin Rear Panel Interface - Main power cable: Fixed tpe on the body - Tuner : 1 input with 1 loop through - RCA: 1 video output, 2 audio output (left and right) - Data port: 1 RS-232C (9-pin type) - Digital output: 1 HDMI/DVI - S/PDIF: 1 optical output - AUX Video & Audio lop for Other Device - SCAR Output for Video & Audio and RGB Power Supply - Input voltage: AC 90~260, 50/60Hz - Type: Switching Mode Power Supply (SMPS) a-- Size:340*240*58MM |
|
Gold Member Username: TapemanNew York Citay in-HD, NY Post Number: 4334 Registered: Oct-06 | I have no clue what yor talking about Yor information got mixed up First thing there is no such animal called 720i There were never 720i First HD came out 10 years ago was 720p Later was replaced by 1080i TV sets is to upscale to 1080p by refreshing cycles from 30 to 60 Today's technology up to 120 Hz refresh cycles There is a day and night difference between 1080i and 1080p In particular when there is a lot of motion But DN choosing 1080p is for securing their programs They own many of the satellites And saving by converting SD to MPEG4 I think this is a very well calculated move I would love to see how is this get answered by coders |
|
Gold Member Username: TapemanNew York Citay in-HD, NY Post Number: 4335 Registered: Oct-06 | Hey plymouth I thought yo were an electronics expert Show me which line accepts 1080p as an input I'm not talking about output Video resolution means output i.e. upscale ouput Yo gotta read between the hidden specs |
|
Gold Member Username: PlymouthCanada Post Number: 9718 Registered: Jan-08 | King Show me a link with the Dn receiver spec. You will never see 1080p like input. |
|
Gold Member Username: PlymouthCanada Post Number: 9719 Registered: Jan-08 | King Look this link on most reputy cie named Tandberg which furnish satellites, cables and IPTV's providers, on their hi grade commercial receiver and you can't see 1080p or 480p input. ttp://www.tandbergtv.com/productview.ink?productid=1307 |
|
Gold Member Username: RiconissanPost Number: 1214 Registered: Feb-09 | KING! You are beginning to worry me. 1080p is an OUTPUT not an input. with all due respect. J |
|
Gold Member Username: RiconissanPost Number: 1215 Registered: Feb-09 | Doreen Tru Dat girl |
|
Gold Member Username: RiconissanPost Number: 1216 Registered: Feb-09 | Plymouth They left out the USB and the hard disk on that box. |
|
Gold Member Username: PlymouthCanada Post Number: 9720 Registered: Jan-08 | King Here is the latest receiver from DN which can get turbo HD VIP 722HD DVR  HD DVR RECEIVER FEATURS * Delivers standard-definition (SD) & high-definition (HD) programming * Provides access to all DISH Network SD & HD channels * Includes Enhanced HD Adaptor for current & future DISH HD programming * Includes 8VSB Tuner Module: o Receive off-air analog and digital broadcasts (requires off-air antenna) o Provides seamless channel selection between off-air analog/off-air broadcasts and DISH Network standard and high definition satellite TV programming CHECK OUT THESE AMAZING DISH VIDEO-ON-DEMAND FEATURES * Name-Based Recording o Pick any show and the DVR will find all new episodes and record them regardless of any changes in program length or broadcast schedule! * 500 gigabyte hard drive, DVR o Up to 350 hours (SD) or 55 hours (HD) of 100% Digital Video Recording (DVR) * Two Satellite Tuners o Record two live programs at the same time o Record a live program while watching another live program o Record two live programs while watching another pre-recorded program o Picture-In-Picture (PIP) * Interactivity, live TV pause o Ability to pause live TV (up to 2 hours on each tuner) o Play, stop, fast forward (4 speeds) o Fast reverse (4 speeds) o Skip forward (30 seconds) o Skip back (10 seconds) o Set manual/auto record event timers and quick record o Recorded events management features to play, delete or protect a recorded event RECEIVER FEATURES * Dual-Tuner satellite receiver * Tuner #1 supports HD or SD programming, tuner #2 is SD only. * Integrated off-air tuner for reception of local digital/HD and analog broadcasts. * 480p, 720p or 1080i resolutions supported via HD outputs. * HD connectivity: DVI-HDTV/DISH DVI (DVI-D), HDMI, and HD Component video outputs. o Both HD and SD content can be viewed on an HDTV using the HD video connections (SD content is up-converted). * SD connectivity: Composite audio/video and S-video outputs. o Both HD and SD content can be viewed on a SDTV using the SD video connections (HD content is down-converted). * HD and SD outputs active simultaneously. * 2-day stored Electronic Program Guide (EPG) features seamless on-screen navigation between off-air digital/analog programming, and DISH Network high-definition and standard-definition programming. * DISH Home Interactive TV. * Parental control locks, program information, themes lists, favorites lists, browse, one-touch channel return, closed-caption support and alternate audio. * Caller ID capable * On-Screen DISH CD song titling * Software upgradeable via satellite REMOTE CONTROL * Color: Silver * UHF Pro 4-component universal remote control. o Controls satellite receiver up to 200 feet through walls and other obstructions, and can be programmed to operate up to three additional components, such as TVs, VCRs and DVD players (via infrared). FRONT PANEL FEATURES * Buttons o Cursor Up, Down, Left, Right and Select for menu/EPG navigation o Power, Info, Menu, Sys Info, Cancel o Satellite/off-air mode lights o IR sensor/IR blast emitter * IR Blast/Receive o To control the start of a VCR program recording * Smart Card receptacle and door REAR PANEL FEATURES * 1 satellite tuner input * 1 DVI-HDTV/DISH DVI (DVI-D) output * 1 set HD Component (Y Pb Pr) video outputs * 1 S-video output * 2 sets of RCA-type audio/video outputs * 1 optical digital output for DolbyA® Digital and PCM digital audio * 2 sets RCA-type audio/video inputs * 1 ATSC antenna input for off-air analog/digital broadcasts * 1 UHF Pro remote antenna input * 1 telephone jack * 3-prong power cord RECEIVER SPECIFICATIONS * Dimensions (approx): H: 2.625" W: 16' D: 13" * Color: Silver * Weight (approx): 7.5 lbs. DISH ANTENNA AND LNBF * Outdoor unit * Compact, unobtrusive 20" dish antenna * DISH 500 for a multi-receiver, multi-satellite household * Advanced low noise block converter with integrated feed (LNBF) for reliable, high-quality digital signals Please give me the superiority of this receiver versus a FTA receiver? |
|
Silver Member Username: PicanhaEast LA Post Number: 486 Registered: Jun-08 | yo yor PTA |
|
Gold Member Username: PlymouthCanada Post Number: 9722 Registered: Jan-08 | Rico This is a commercial receiver(tandberg) use by Dn  |
|
Gold Member Username: PlymouthCanada Post Number: 9723 Registered: Jan-08 | Turbo HD is nothing more than 1080i http://dishnetwork.ws/receivers.html |
|
Gold Member Username: RiconissanPost Number: 1221 Registered: Feb-09 | * 480p, 720p or 1080i resolutions supported via HD outputs. I wish they would come out with a 1080p INPUT. Those bastardss |
|
Gold Member Username: RiconissanPost Number: 1222 Registered: Feb-09 | Please give me the superiority of this receiver versus a FTA receiver? Well they have a "Compact, unobtrusive 20" dish antenna" |
|
Gold Member Username: PlymouthCanada Post Number: 9724 Registered: Jan-08 | Here is the latest satellite lauch for Dn echostar 12 and a press release which give the latest receiver VIP 722HD DVR --------------------------------------------------- About DISH Network Corporation DISH Network Corporation (Nasdaq: DISH), the nationi½s third largest pay-TV provider and the leader in digital television, provides approximately 13.78 million satellite TV customers as of Sept. 30, 2008 with industry-leading customer satisfaction which has surpassed major cable TV providers for eight consecutive years. DISH Network also provides customers with award-winning HD and DVR technology including the ViPi½722 HD DVR, which received the Editorsi½ Choice awards from both CNET and PC Magazine. In addition, subscribers enjoy access to hundreds of video and audio channels, the most International channels in the U.S., industry-leading Interactive TV applications, Latino programming, and the best sports and movies in HD. DISH Network offers a variety of package and price options including the lowest all-digital price in America, the DishDVR Advantage Package, high-speed Internet service, and a free upgrade to the best HD DVR in the industry. DISH etwork is included in the Nasdaq-100 Index (NDX) and is a Fortune 300 company. Visit |
|
Gold Member Username: RiconissanPost Number: 1225 Registered: Feb-09 | I called and the little girl that I talked to told me that she "could not give me the keys for viewsat" Femaledog! Customer service my asz! |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2897 Registered: Dec-06 | http://en.wikipedia.org/wiki/HD_ready |
|
Gold Member Username: RiconissanPost Number: 1227 Registered: Feb-09 | Doreen That is good information and seems pretty accurate in this case. Just remember that wikipedia is the "blonde" of all the search engines.  |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2898 Registered: Dec-06 | ha ha rico |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2899 Registered: Dec-06 | (Q).... WHAT DO I NEED FOR HDTV? (A).... HDTV set-top-box with receiver or integrated TV set with HD receiver HD-ready display - LCD, plasma, or DLP HD devices must have min resolution of 720 physical lines HD resolutions are typically 720p (p=progressive) or 1080i (i=interlaced) |
|
Gold Member Username: RiconissanPost Number: 1232 Registered: Feb-09 | Yes that is what you need for a good picture. Our only problem is that we need a code to work around the encryption that DN has changed to. Subs are getting it without new hardware. Cable companies are getting it without new hardware. Hell, Hotels from Panama to Novi Scotia are getting it without new hardware. J |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2900 Registered: Dec-06 | Isn't that what King is babbling about ? I doubt we will need new hardware. Like I said b4... I use a bev. receiver ( paid sub) and its all gone to N3 . Thing is my bev rec. isn't HD. So if I can pick up N3 on BEV with just a new card then I am sure the coders can figure things out and crack Dishnet with out new hardware. ( i hope) |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2901 Registered: Dec-06 | the picture quality just wont be HD thats all. |
|
Gold Member Username: PlymouthCanada Post Number: 9727 Registered: Jan-08 | Hehe King is right for the new hardware, but it can take 2 years or more for completed it, but few receivers can work on this now like Vs and Cw. |
|
New member Username: RicocossanPost: 1344 Post Number: 4 Registered: Jun-09 |  |
|
Gold Member Username: RiconissanPost Number: 1237 Registered: Feb-09 | Everyone here knows that the only Idiots that post that picture are here to knock down Ecoustics. I bet that picture is your screen saver. Wartfag if you enjoy getting your 12 post in and making another email keep it up. You do not bother me. Applebitch you will see what it is like. Youth is wasted on the young. Go do something with your lives. geekfaggs Get a real job. Find your real father. He is probably in jail or the welfare line. He obviously never taught you how to tie your shoes. Yet alone make change for a dollar. FO |
|
Gold Member Username: TapemanNew York Citay in-HD, NY Post Number: 4336 Registered: Oct-06 | FTAss This is yo mama aribian boi    |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics