Silver Member
Username: Jryevols Little rock,
Arkansas
USA
Post Number: 111 Registered: Mar-07
Posted on
Wednesday, May 27, 2009 - 02:00 GMT On my Pansat 3500 SD I was able to load satellite Echo - 7 and Echo 8. This gave me all the channels I needed. I received my new 9200 HD and it has Echo 7 , but no Echo 8. Now I can only find Echo 7. Can anyone tell me where to look Thanks
Gold Member
Username: Plymouth Canada
Post Number: 9405 Registered: Jan-08
Posted on
Wednesday, May 27, 2009 - 02:52 GMT sat-man Echo 8 is now Echo 10, 11
Silver Member
Username: Jryevols Little rock,
Arkansas
USA
Post Number: 113 Registered: Mar-07
Posted on
Wednesday, May 27, 2009 - 03:02 GMT Cananyone provide me with instructions on how to get HD channels. The system is ready , but I am lost on waht to do ,no instructions
Gold Member
Username: Plymouth Canada
Post Number: 9407 Registered: Jan-08
Posted on
Wednesday, May 27, 2009 - 03:18 GMT sat-man Load this bin: http://currentbins.com/pansat/9200%20HD/ You only do a autoscan as for a SD receiver.
Silver Member
Username: Chumley Post Number: 257 Registered: Dec-08
Posted on
Wednesday, May 27, 2009 - 10:51 GMT Scroll thru the TP's at 110w , look for 12239 V , it will have symbol rate of 21.500. if not there add it , then go to advanced and tp scan and scan it , it should look like this echo 10-11 12239 v 21.500 dvbs2/8psk/on 2/3 auto all off tp scan
Platinum Member
Username: Nydas Post Number: 15162 Registered: Jun-06
Posted on
Wednesday, May 27, 2009 - 13:12 GMT What was/is your LNB type setting for Echo 8/10 (Echo 10/11) on Pansat 3500, and what were your switch settings? Same applies to Echo 7. You will have to duplicate these settings on your new receiver.