Silver Member
Username: Kaanwal Ont
Canada
Post Number: 102 Registered: Sep-08
Posted on
Tuesday, May 19, 2009 - 23:15 GMT Is the loader and cable for CW600s and CW600premium are same?
Gold Member
Username: Plymouth Canada
Post Number: 9269 Registered: Jan-08
Posted on
Wednesday, May 20, 2009 - 00:09 GMT kaanwal ali CW600S use: CaptiveWorks 600S 1_.05Loader CW600P use: Loader V1.07P
Silver Member
Username: Riconissan Post Number: 963 Registered: Feb-09
Posted on
Wednesday, May 20, 2009 - 00:19 GMT Thanks Plymouth
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 103 Registered: Sep-08
Posted on
Wednesday, May 20, 2009 - 00:22 GMT Plymouth can u please guide me, i have bought a premium how to down load a file or any link b/c i m dont know much about this box i will be very thank full.
Gold Member
Username: Plymouth Canada
Post Number: 9272 Registered: Jan-08
Posted on
Wednesday, May 20, 2009 - 00:55 GMT kaanwal ali Use this loader 1.07: http://currentbins.com/captiveworks/CW600P/ Now press F1 and 000 on remote for enable the patch then wait on a channel until the autoroll found the keys. Enjoy!
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 104 Registered: Sep-08
Posted on
Wednesday, May 20, 2009 - 02:39 GMT Thanks Plymouth, i downloaded the file as per u'r instructions, but still getting a message that signal is week, any help regarding that, u can answer tomorrow .
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 105 Registered: Sep-08
Posted on
Wednesday, May 20, 2009 - 02:44 GMT sorry its weak not week
Gold Member
Username: Plymouth Canada
Post Number: 9275 Registered: Jan-08
Posted on
Wednesday, May 20, 2009 - 03:09 GMT Kaawal Do a autoscan on your satellite with red button on remote, I downloaded it on my CW600P and I had same problem.
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 106 Registered: Sep-08
Posted on
Wednesday, May 20, 2009 - 03:21 GMT Ok Plymouth
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 107 Registered: Sep-08
Posted on
Wednesday, May 20, 2009 - 14:21 GMT Thanks Plymouth i got the picture.
Gold Member
Username: Plymouth Canada
Post Number: 9277 Registered: Jan-08
Posted on
Wednesday, May 20, 2009 - 16:26 GMT Kaanwal You are Welcome!
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 108 Registered: Sep-08
Posted on
Wednesday, May 20, 2009 - 22:18 GMT Plymouth, first i scanned the echo3(61.5), it was directly attached wth the dish, now I used the switch as for other birds like echo 7 and 8.1 i followed the process but not getting anything after blind scan.
Silver Member
Username: Chumley Post Number: 206 Registered: Dec-08
Posted on
Wednesday, May 20, 2009 - 22:29 GMT Have you assigned the correct port in antenna settings for your sats... Don't do the blind scan ..try auto scan...
Platinum Member
Username: Nydas Post Number: 15139 Registered: Jun-06
Posted on
Wednesday, May 20, 2009 - 22:46 GMT CaptiveWorks receivers are freezing since 6.00 pm today.
Gold Member
Username: Plymouth Canada
Post Number: 9299 Registered: Jan-08
Posted on
Wednesday, May 20, 2009 - 22:48 GMT kaanwal ali You must hook the good LNB on good port then assigned the good port in satellite menu. 119 port 1 110 port 2 61.5 port 3
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 109 Registered: Sep-08
Posted on
Thursday, May 21, 2009 - 01:20 GMT Plymouth i will try this and let u know the results.
Gold Member
Username: Plymouth Canada
Post Number: 9313 Registered: Jan-08
Posted on
Thursday, May 21, 2009 - 01:51 GMT OK Good Luck!
Platinum Member
Username: Nydas Post Number: 15147 Registered: Jun-06
Posted on
Thursday, May 21, 2009 - 02:49 GMT Captiveworks files have just been released. You can get them at [link removed]
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 110 Registered: Sep-08
Posted on
Thursday, May 21, 2009 - 14:31 GMT Thanks Nalin, Plymouth i did the port setting as u told , before i had (119),(61.5) and ( (110) now i have (118.1) and 61.5 ,I did auto scanning and everythig as u told but still no pic only a message of no singnal.
Gold Member
Username: Plymouth Canada
Post Number: 9318 Registered: Jan-08
Posted on
Thursday, May 21, 2009 - 15:18 GMT kaanwal ali You use 119 for 118.8 or you loaded the satellite info from viewsatusa.com?
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 111 Registered: Sep-08
Posted on
Thursday, May 21, 2009 - 16:07 GMT I dont understand Plymouth, do i hve to load the sat info and how?
Gold Member
Username: Plymouth Canada
Post Number: 9320 Registered: Jan-08
Posted on
Thursday, May 21, 2009 - 16:52 GMT Sorry Kaanwal I'm blind with another thread. Be sure that your connection on switch are identical with port in satellite setting.
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 112 Registered: Sep-08
Posted on
Thursday, May 21, 2009 - 18:38 GMT That ok Plymouth, indeed thank u very much for being so helpful. Plymouth y does 110 and 119 disappear wen i changed the switch port setting and how can i get them back.
Gold Member
Username: Plymouth Canada
Post Number: 9323 Registered: Jan-08
Posted on
Thursday, May 21, 2009 - 19:15 GMT Kaanwal Post your LNB Type and LNB Freq. for 110 and 119
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 113 Registered: Sep-08
Posted on
Friday, May 22, 2009 - 01:56 GMT Plymouth its 119w(echo7) LNB1 LNBfreq 11250 110w(echo6,8) LNB4 LNBfreq 11250 61.5w(echo3) LNB2 LNBfreq 11250
Platinum Member
Username: Nydas Post Number: 15148 Registered: Jun-06
Posted on
Friday, May 22, 2009 - 02:27 GMT Did you install the new file that came out yesterday? Cw600pv2.32 2009_05_20.bin As you can see it is dated 20th May, 2009.
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 114 Registered: Sep-08
Posted on
Friday, May 22, 2009 - 02:52 GMT yes i did Nalin.
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 115 Registered: Sep-08
Posted on
Friday, May 22, 2009 - 03:47 GMT Plymouth can u tell me wat sud be the LNB type and LNBfreq for 110, 119 and 61.5, Thank u for all the help.
Gold Member
Username: Plymouth Canada
Post Number: 9328 Registered: Jan-08
Posted on
Friday, May 22, 2009 - 10:37 GMT Kaanwal 119 LNB Type: Standard LNB Freq: 11250 Port: 1 110 LNB Type: Standard LNB Freq: 11250 Port: 2 61.5 LNB Type: Standard LNB freq: 11250 Port: 3
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 116 Registered: Sep-08
Posted on
Friday, May 22, 2009 - 17:33 GMT Thanks Plymouth, after trying i will let u know the result.
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 117 Registered: Sep-08
Posted on
Saturday, May 23, 2009 - 00:22 GMT Plymouth i did scan wth the same ports and lnb freq, and there are two given types of lnb normal and OCS-DP ,i used normal wth all the birds, wen i scanned first(61.5)I got all the channels but , wen i scanned the 119, the pic of 61.5 disappear and now i m getting the channels and pic but NDTV(IMAGINE) channel is not there, can u help me to get that channel.
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 118 Registered: Sep-08
Posted on
Saturday, May 23, 2009 - 00:43 GMT Plymouth i think i m putting the rite transponder ,if u can help me wth that . Thanks in advance.
Gold Member
Username: Riconissan Post Number: 1013 Registered: Feb-09
Posted on
Saturday, May 23, 2009 - 01:09 GMT kaanwal ali Make sure that you are using different ports in the setting menu for 61.5 and 119. There must be a different port setting for each satellite.
New member
Username: Evaus_ipap Warped
Post Number: 2 Registered: May-09
Posted on
Saturday, May 23, 2009 - 01:13 GMT Rico your mother Is waiting for you In the shed. Get out there quick and get a lick.
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 119 Registered: Sep-08
Posted on
Saturday, May 23, 2009 - 01:17 GMT Rico i m using port 3 for 61.5 and port 1 for 119W thanks, Mr dogwart please let these nice ppl help me.
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 120 Registered: Sep-08
Posted on
Saturday, May 23, 2009 - 01:19 GMT Oops! its hogwart.
New member
Username: Evaus_ipap Warped
Post Number: 3 Registered: May-09
Posted on
Saturday, May 23, 2009 - 01:23 GMT
Gold Member
Username: Plymouth Canada
Post Number: 9347 Registered: Jan-08
Posted on
Saturday, May 23, 2009 - 02:08 GMT kaanwal ali Which dish you use? Is it a DP 500 Plus?
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 121 Registered: Sep-08
Posted on
Saturday, May 23, 2009 - 02:32 GMT Plymouth, Im so sorry i dont know about it, how will i get this info about dish .
Gold Member
Username: Plymouth Canada
Post Number: 9348 Registered: Jan-08
Posted on
Saturday, May 23, 2009 - 03:19 GMT List the LNB type choice in satellite menu.
Silver Member
Username: Chumley Post Number: 228 Registered: Dec-08
Posted on
Saturday, May 23, 2009 - 11:33 GMT Plymouth Gold Member Username: Plymouth Canada Post Number: 9341 Registered: Jan-08 Posted on Friday, May 22, 2009 - 04:50 pm: Here is the answer from people help by me: --------------------------- kaanwal ali Silver Member Username: Kaanwal Ont Canada Post Number: 107 Registered: Sep-08 Posted on Wednesday, May 20, 2009 - 10:21 am: Thanks Plymouth i got the picture. ----------------------------------------------------- Bragging a little too soon. ..wouldn't you say.
Silver Member
Username: Chumley Post Number: 229 Registered: Dec-08
Posted on
Saturday, May 23, 2009 - 12:41 GMT Plymouth Gold Member Username: Plymouth Canada Post Number: 9318 Registered: Jan-08 Posted on Thursday, May 21, 2009 - 11:18 am: ------------------------------------ kaanwal ali You use 119 for 118.8 or you loaded the satellite info from viewsatusa.com?
Silver Member
Username: Kaanwal Ont
Canada
Post Number: 122 Registered: Sep-08
Posted on
Saturday, May 23, 2009 - 22:28 GMT Plymouth i changed the ports and scanned and got NDTV, U know due to some reason i had to scanned it again and after scanning ,the ndtv channel disappeared again . So i changed the port setting and scanned and get the ndtv channel again. I dont know wat is the reason, but thank u very much i got the channels, and sorry for the inconvenience
Gold Member
Username: Plymouth Canada
Post Number: 9364 Registered: Jan-08
Posted on
Saturday, May 23, 2009 - 22:37 GMT Kaanwal you are Welcome! The only inconvenience is this idiot Cumley. So you know this idiot is only good for bashing and is useless. Enjoy my friend!
Silver Member
Username: Chumley Post Number: 239 Registered: Dec-08
Posted on
Saturday, May 23, 2009 - 22:39 GMT Playmouth , you are welcome