|
New member Username: Fairym71Florida Post Number: 1 Registered: Mar-09 | how do i know if i am getting echo 8,10 or another satellite |
|
New member Username: Fairym71Florida Post Number: 2 Registered: Mar-09 | I am using a Pansat 2500A receiver running Fwank 7 Lzma-v209 F_emu Jvvh-Team Puff Puff ver103 |
|
New member Username: Fairym71Florida Post Number: 3 Registered: Mar-09 | When I Blind scan echo 8 it freezes up at different percents |
|
New member Username: Fairym71Florida Post Number: 4 Registered: Mar-09 | echo 7 scans fine |
|
Gold Member Username: DimwittPost Number: 1194 Registered: Aug-06 | You can compare what you have scanned and think is echo 8,10 with the list at this site http://dishuser.org/110list.php it also has all the channels if you select Full List. |
|
New member Username: Fairym71Florida Post Number: 5 Registered: Mar-09 | Thanks |
|
Platinum Member Username: NydasPost Number: 14670 Registered: Jun-06 | Total ECM? https://www.ecoustics.com/electronics/forum/home-video/558898.html |
|
New member Username: Fairym71Florida Post Number: 6 Registered: Mar-09 | it freezes while it is channel searching only on echo 8 |
|
Gold Member Username: DimwittPost Number: 1195 Registered: Aug-06 | You could load a earlier bin and see if it scans then load the latest bin (don't have a 2500 so i don't know if you end up at the language screen after every download - if you do, loading earlier bins won't help) If its stuck at a certain percentage you could delete that transponder and scan again. Maybe its getting stuck on a transponder that has locals only. |