110 PPV Frequencies

 

Bronze Member
Username: Regrun2

Post Number: 41
Registered: Nov-07
hii.. i have 110 W.. but i m unable to catch Pay Per View Channels (501-532) on it..

can someone please tell me some of the frequencies for those PPV channels? I will manually scan those frequencies to get those channels..

thanks a lot for help in advance..
 

Gold Member
Username: Rtap

FL

Post Number: 2358
Registered: Jan-07
http://dishuser.com/110list.php
 

Gold Member
Username: Plymouth

Canada

Post Number: 8054
Registered: Jan-08
reg

Are you able to get few Horizontal channel?

List your receiver.

If you do a blind scan you must get those channels.
 

Bronze Member
Username: Regrun2

Post Number: 42
Registered: Nov-07
Plymouth,

its Viewsat Ultra..

the situation on hand is, i have got a dual LNB 110, and on one reciever, all PPV (Captivework) are coming.. and on my Viewsat Ultra, i dont get them even with blind screen..

strange.. any help/hints??

Thanks..
 

Gold Member
Username: Plymouth

Canada

Post Number: 8058
Registered: Jan-08
Ok Reg

Go in menu, antenna setup and on 110W

List what you see: LNB Type, LNB Freq, etc.
 

Gold Member
Username: Plymouth

Canada

Post Number: 8059
Registered: Jan-08
Reg

Put the LNB Type on standard and LNB Freq on 11250.

 

New member
Username: Ricocossan

Post Number 379

Post Number: 3
Registered: Mar-09
eg

Are you able to get few Horizontal channel?

List your receiver.

If you do a blind scan you must get those channels.



Upload
 

Bronze Member
Username: Regrun2

Post Number: 43
Registered: Nov-07
hii Plymouth,

I have put LNB type to standard and frequency to 11250 as you said.. I do get good Signal and Quality..

i was and still am able to catch some other channels but none PPVs :-(

Thats why I am looking for some of the frequencies of PPV transponders, so that i can manually add that frequency and scan it..

Thanks a lot for your continuous help..
 

Bronze Member
Username: Regrun2

Post Number: 44
Registered: Nov-07
plymouth, please helpp..
 

Gold Member
Username: Dimwitt

Post Number: 1161
Registered: Aug-06
the info is here

www.lyngsatDOTcom/packages/dish110.html

copy and paste to address bar and take out the DOT and replace with a period (.)
 

Gold Member
Username: Plymouth

Canada

Post Number: 8068
Registered: Jan-08
Reg

Go in Menu
System information
Code Menu
Select Nagra
Down arrow then select 00 01 00,01 01 00 and 01 06 00 and delete those 3 Dish provider with "F3" on remote and load latest bin file, save and exit, wait that the autoroll found keys and all Tp come back
 

Bronze Member
Username: Regrun2

Post Number: 45
Registered: Nov-07
Thanks Plymouth..
but no luck
i tried doing blind scan after doing what u said.. but still doesnt work
 

Gold Member
Username: Plymouth

Canada

Post Number: 8087
Registered: Jan-08
Reg
Are you able to get few Horizontal channels?
 

Bronze Member
Username: Regrun2

Post Number: 46
Registered: Nov-07
yes.. i am getting some horizontal channels
 

Bronze Member
Username: Regrun2

Post Number: 47
Registered: Nov-07
acually no.. i am not getting any Horizontal channels.. I just went through all of them and they are all Vertical.. sorry about that
 

Gold Member
Username: Plymouth

Canada

Post Number: 8088
Registered: Jan-08
Reg try a new switch.

I had replaced a switch which broke on 1 or 2 Tp.

 

Bronze Member
Username: Regrun2

Post Number: 48
Registered: Nov-07
i have connected 110 cable straight to the receiver now and have set it to None.. doing blind scan now..
 

Bronze Member
Username: Regrun2

Post Number: 49
Registered: Nov-07
no luck.. can not get any Horizontal channels.. help???
 

Gold Member
Username: Plymouth

Canada

Post Number: 8113
Registered: Jan-08
Reg
Try a new cable or a new LNB.

Check your antenna setting because after a scan it could be return on default setting.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us