Unable to load 209

Aerol New member Username: Aerol Post Number: 1 Registered: Mar-09	Posted on Sunday, March 01, 2009 - 22:44 GMT Megasat YT6688 using Ukr_Jvvh-Team-PUFF_(Lzma)_v207.bin. (Been using it without problems for about a month.) I open any loader and go through the process of loading the 209 bin and the progress stays at 0% with the box's display showing a bar going around the edge. This happens with the 208 bin as well. Now, by "go through the process of loading..." I mean, I turned off the box with the switch and turn on and as soon as I see the first P, I click write. I've also clicked write before I even turn on the box and it goes through the same process as above. I'm wondering if maybe the ECM screwed up my box; or if not, what can be done to get the 209 bin loaded?
Nalin Nyda Platinum Member Username: Nydas Post Number: 14548 Registered: Jun-06	Posted on Sunday, March 01, 2009 - 23:50 GMT Are you using a straight RS232 DB9 F/F cable or are you using a USB port and USB-Serial converter?
Aerol New member Username: Aerol Post Number: 2 Registered: Mar-09	Posted on Monday, March 02, 2009 - 00:07 GMT Straight RS232 DB9 F/F, same one I've always used.
Nalin Nyda Platinum Member Username: Nydas Post Number: 14549 Registered: Jun-06	Posted on Monday, March 02, 2009 - 17:38 GMT Just load the 1.03 again using UkRoNiC's BOX Updater .421 Loader. Then load LZMA_209 using BL Updater 1.4
Aerol New member Username: Aerol Post Number: 3 Registered: Mar-09	Posted on Monday, March 02, 2009 - 18:11 GMT Loading the 1.03 stops at 2%. (Using UkRoNiC's BOX Updater .421.)
Nalin Nyda Platinum Member Username: Nydas Post Number: 14554 Registered: Jun-06	Posted on Monday, March 02, 2009 - 21:29 GMT Without attempting to load anything, are you able to get to "ON" status after switching the receiver on?
Plymouth Gold Member Username: Plymouth Canada Post Number: 7916 Registered: Jan-08	Posted on Monday, March 02, 2009 - 21:31 GMT Nalin can you help this guy? https://www.ecoustics.com/electronics/forum/home-video/554845.html Thanks
Aerol New member Username: Aerol Post Number: 4 Registered: Mar-09	Posted on Monday, March 02, 2009 - 23:08 GMT Yes. Working quite well, besides not being able to update to 209.
Nalin Nyda Platinum Member Username: Nydas Post Number: 14560 Registered: Jun-06	Posted on Tuesday, March 03, 2009 - 00:16 GMT 1). Open UkRoNiC's BOX Updater .421 Loader. FILE, Choose -PUFF-boot_Ver1.0.3 bin. Turn receiver ON and " LET Reciever Fully Boot To ON or channel # ". Hit Download on Loader. When Download completes receiver will reboot with P.U.F.F pausing on F. Turn receiver OFF from back switch. 2). Open Jvvh TeamPUFF Loader or UkRoNiC's BOX Updater .420 or BL Updater 1.4 Choose Fwank7_Jvvh-Team-PUFF_(Lzma)_V209 bin. Turn receiver ON and first " P. " Hit Download. When Download completes receiver will reboot with P.U.F.F. pausing on F for 10 seconds then come ON and your good to go. Alternative PUFF_LZMA link Download and unzip into separate directory. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS.
Aerol New member Username: Aerol Post Number: 5 Registered: Mar-09	Posted on Tuesday, March 03, 2009 - 00:59 GMT At step one, UkRoNiC's BOX Updater .421 Loader stops at 2% and does nothing. Canceling the download, and after 10 or so seconds the STB reboots. I clicked download, on Channel # and on "ON". (Tried twice.)
Nalin Nyda Platinum Member Username: Nydas Post Number: 14562 Registered: Jun-06	Posted on Tuesday, March 03, 2009 - 02:59 GMT One more effort to load ther 1.02 boot and then 1.03 boot. If you can't get going, 1. install b60 boot 2. 294T BIN. 3. go through PUFF (Not LZMA conversion) 4. Then do 1.03 and 209 BIN, etc. You may cause the CPU to sleep, and will need to jtag. As an alternative, use jtag technique to load the LZMA_ 209 full jtag BIN (it is over 1 MB). Revert to 2500 is in the PUFF URL. PUFF link

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us