LZMA_PUFF_209 BIN

Nalin Nyda Platinum Member Username: Nydas Post Number: 14526 Registered: Jun-06	Posted on Friday, February 27, 2009 - 20:58 GMT Essential kit 103 for conversion to 103 LZMA boot Kit. This is the new change recommended. Convert to PUFF_LZMA. There will not be any more PUFF PUFF_LZMA_209 BIN in separate file ~~Alternative PUFF_LZMA link~~ Alternative PUFF_LZMA link Download and unzip into separate directory. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS. Use the 209 Bin only on 2500s and FLU already converted to LSMA_PUFF. Or if you have PUFF, install LZMA using 103 boot and then install the LZMA 209 BIN.
Nalin Nyda Platinum Member Username: Nydas Post Number: 14533 Registered: Jun-06	Posted on Saturday, February 28, 2009 - 01:22 GMT Bump
Abby Silver Member Username: Viruscauser Leesburg, Georgia Post Number: 999 Registered: Mar-07	Posted on Saturday, February 28, 2009 - 02:23 GMT Fwank7 209 LZMA working great here. Did not lose my channels, did not have to set default... nothing.
Nalin Nyda Platinum Member Username: Nydas Post Number: 14541 Registered: Jun-06	Posted on Saturday, February 28, 2009 - 14:08 GMT I tested the LZMA_209 BIN on three converted receivers and all were working fine last night.
steve r New member Username: Mlt2 Post Number: 7 Registered: Jul-07	Posted on Saturday, February 28, 2009 - 15:33 GMT Hello, my pansat 2500 was freezing with the 207 and I upgraded to the 209 it's still freezing bad. Did I do some thing wrong or are we needing a new fix?
Nalin Nyda Platinum Member Username: Nydas Post Number: 14544 Registered: Jun-06	Posted on Saturday, February 28, 2009 - 16:01 GMT Do the 1.03 boot again followed by LZMA 209 BIN and then user setup and scan.
gupu Bronze Member Username: Gupulamba Brampton, Ontario Canada Post Number: 65 Registered: Oct-07	Posted on Saturday, February 28, 2009 - 21:18 GMT Nalin which satellite should I scan for indian channels on flu with because i scanned the sat 82 which comes automatically with the new bin it shows scarambled channels
Arabic user Bronze Member Username: Arabic Windsor, Ontario Canada Post Number: 22 Registered: May-05	Posted on Saturday, February 28, 2009 - 21:23 GMT i have a converted FLU to Lzma but it is the first time to have no signal. My dish is ok becuase i have a subscription with DN and it works ok
Plymouth Gold Member Username: Plymouth Canada Post Number: 7849 Registered: Jan-08	Posted on Saturday, February 28, 2009 - 21:23 GMT gupu Try 61.5W
gupu Bronze Member Username: Gupulamba Brampton, Ontario Canada Post Number: 66 Registered: Oct-07	Posted on Saturday, February 28, 2009 - 21:25 GMT k ill try that thanks
Plymouth Gold Member Username: Plymouth Canada Post Number: 7851 Registered: Jan-08	Posted on Saturday, February 28, 2009 - 21:37 GMT You are Welcome
gajanan New member Username: Gajan Post Number: 1 Registered: Feb-09	Posted on Saturday, February 28, 2009 - 23:43 GMT Nalin, what loader should I use? I have difficulty using the loaders. Help me
Nalin Nyda Platinum Member Username: Nydas Post Number: 14546 Registered: Jun-06	Posted on Sunday, March 01, 2009 - 23:37 GMT There is a different loader for Boot 1.03 and LZMA BIN 209. If you download from the above URLs you will get all the necessary information and the loaders. Arabic user: Are you using BIN 209? There are many channels gone over to Nagra 3, and you can't get them. If you are not getting any, then you should reinstall BOOT 1.03 and then install LZMA BIN 209. You will then have to also do a user setup, antenna setup and scan.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us