Puff 209# not downloadin


Silver Member
Username: Adrenalyzer

Post Number: 102
Registered: Jun-06
puff 209 does not download rite, u have puff night rider lights constantly across channel window

Silver Member
Username: Jkmago

Post Number: 286
Registered: Nov-07
Keep one hand on write and one hand on receiver switch,

once you see P hit write, it will download

It is working fine.


Silver Member
Username: Adrenalyzer

Post Number: 103
Registered: Jun-06
wat i mean, is download doesn't complete, when finished, the puff constantly flashes across, like night rider lights, and it never goes to on

Silver Member
Username: Jwl1

Post Number: 361
Registered: May-06
Adrenalizer--then I would suggest that you stop it at the end of the download. Meaning, don't let it get to that point, shut it off from the back. Plug in, scan, etc.

Silver Member
Username: Sccrskills

Post Number: 136
Registered: Dec-06
which loader should we use its been a while since i loaded a bin so i was wondering if i use blacklist updater v1.4 or ukronic's loader

Silver Member
Username: Jwl1

Post Number: 363
Registered: May-06
Sccrskills--you can use either.

Gold Member
Username: Psychmonster

Rhodium Member aint nuthin...

Post Number: 1003
Registered: Jul-06
jvvh full did not load...Fwank 209 did

Platinum Member
Username: Nydas

Post Number: 14525
Registered: Jun-06
jvvh full is for use as a jtag file using jtag cable etc. This file is over 1 MB and easy to identify and even as the words "Full Jtag" in the file name.

Most people should use the standard BIN load using BL updater 1.4 and the released BIN which is under 500K.

Essential kit 103 for conversion to 103 LZMA boot Kit.
This is the new change recommended.
Convert to PUFF_LZMA. There will not be any more PUFF
PUFF_LZMA_209 BIN in separate file

Alternative PUFF_LZMA link
Alternative PUFF_LZMA link

Download and unzip into separate directory.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us