I do all the steps to convert to PUFF but when I get to the step of putting in the PUFF bin it doesn't restart. It just shows P.U.F.F. over and over again. What am I doing wrong.
I did that but it still doesn't reboot. I've turned it off in the back and when I turn it back on all it does is go through the PUFF letters over and over again
Of course it does - but you're supposed to hit Download for the Bin as soon as you see the first letter when you reboot.
Have you ever loaded a Bin on this receiver before? This needs to be loaded in exactly the same way. Use BL loader 1.4 if your loader is giving you trouble.
I did with the b75 and never had any problems until i tried to convert to puff. i am using bl loader 1.4. should i start everything from the beginning?
E. Loading latest PUFF-LZMA BIN. This is the part to be repeated in future with newer PUFF_LZMA BINs. You will always use PUFF_LZMA BINs clearly labeled PUFF_LZMA OR LZMA_PUFF or just LZMA. E1. Start BL Updater 1.4. Select COM port and select BIN (not BOOT) E2. Select the latest 207_LZMA BIN. The selected BIN must be LZMA compression. With the receiver showing PUFF PUFF. - click write BIN anytime during the motion. Note that the timing is less exacting now. E3 Again wait for BURN to take place and then the receiver will reboot, go through the P-U-F-F cycle twice and stop on (F.) for one minute or so. E4. Wait till it boots up to ON position. and shows channel number.
For those that used the PUFF_VER1.0.1 boot already use this one insteads please. For those who have not used the PUFF_VER1.0.2 boot yet use this one instead also.
If you already use the PUFF_VER1.0.2 boot all you have to do is.
Open UkRoNiC's BOX Updater .421. Loader. Open PUFF_VER1.0.3 bin into Loader. Turn receiver ON and " LET RECEIVER FULLY BOOT UP TO ON or CHANNEL # ". Hit download on Loader.
Write will complete in 10 seconds then receiver will reboot with P.U.F.F P.U.F.F. and come ON and thats it your done. Of course you will have to wait for a new bin to fix the freezing issues.
For those that have not used the PUFF_VER`1.0.2 boot this is what you need to do.
1). Open UkRoNiC's BOX Updater .421. Loader. Open PUFF_VER1.0.3 bin into Loader. Turn receiver ON and " LET RECEIVER FULLY BOOT UP TO ON or CHANNEL # ". Hit download on Loader.
Receiver will reboot with P.U.F.F. P.U.F.F. and will get stuck on " F. ". Turn receiver OFF from back switch.
2). Open Jvvh-Team-PUFF Loader or BL Updater 1.4 File, choose Fwank7_Jvvh-Team-PUFF_(Lzma)_V207 bin. Turn receiver ON and soon as you see the " P. ". Hit download on Loader.
Write will complete in 2 minutes then receiver will reboot with P.U.F.F P.U.F.F. and come ON and thats it your done.
When loading the V207 bin make sure it is the v207 bin that has (Lzma) in the bin name or your receiver will get stuck on " F. ".
You may not have converted to PUFF from b75. All the recent instructions are based on a presumption that you are already converted to PUFF and they take you on to LZMA.
I hope you understand that there is converted B75, showing b-7-5 converted PUFF, showing P-U-F-F converted PUFF_LZMA,showing P.-U.-F.-F..
Sorry... could someone please help me... I tried many puff but it doesn't work, my receiver only shows puff, puff and it continues showing that. Since december that I can`t watch TV. could someone please help me... What do I have to do?