KmW Reload the bin. Is it on only one satellite or on many?
It seems to be a bad switch or a cable, so try to unhook and rehook the cable (try a new cable) or replace the switch. Is it a new installation? If yes you are on a bad satellite.
Thanks for the response. Not a new install. When each latest bin is first loaded the problem goes away for a few hours. Once it starts, if I reload the bin again the problem doesn't reset. It seems to only be on} one satellite. All connections have been tested and satellites reloaded numerous times. ????
SAVE first. You will have to work specifically on the TPs associated with the channels assosiated with the channels where they are coming up with wek signals. Go to TP Edit and change the TP frequency. Change it by a value of 3 to 6 (i.e. +3 to +6 or - 3 to -6), come out and see if the problem is cured. For example, a weak signal TP of 12355 can be changed to 12359 or 12349, etc etc. It is a trial and error method.