hey guys i have a pansat clone receiver i have an old bin on it its a b-75 bin and i can't get the signal to watch the fight. i need help the bin is 2.98 and the receiver is a megasat yt6688 please i need help any help would be appreceiated.
In your computer , Create a directory 'PUFF_Conversion' Download 'Full_Kit_PUFF_205C_femu.zip' and unzip into this directory. Download 'All_V206_PUFF_femu.zip' and unzip into this directory.
Create a subdirectory under 'PUFF_Conversion' directory, named 'Stuck_on_F' Download 'Stuck_On_F.zip' and unzip into this directory.
Next step: You are not likely to need this , but do this step anyway. Create a subdirectory under 'PUFF_Conversion' directory, named 'UKR_Flash_Fix' Download 'UKR_Flash_Fix.zip' and unzip into this directory.
B. PUFF_LZMA section URL and Downloads: PUFF_LZMA link
In your computer , Create a directory 'LZMA_Conversion' Download 'PUFF-Ver.1.0.3_Essentials.zip' and unzip into this directory. Download 'ALL_207_PUFF_LZMA.zip' and unzip into this directory. Download 'Fwank7_LZMA_207-03.doc' and unzip into this directory.
C. PUFF CONVERSION Print out the instructions in 'PUFF_Conversion' and follow closely. If you are installing ANY boot file, you have to start from the receiver in 'ON' status.
If you are installing b60 boot, make sure you use the Chancy loader, '2700 to 2500 Loader Converter.exe' '" boot60 Area In particular, it is important to install 294T Bin if you have b60 BOOT. '" boot60 Area
After b60 and 2924T, you need to convert to PUFF, by installing the 640K PUFF BOOT/BIN 'Conversion to PUFF Basic' subdirectory.
Do a hardware reset '" Switch off at back and switch on after 40 seconds.
Look at the instructions in 'Stuck_on_F' subdirectory and install 1.0.1 BIN.
Add a BIN such as PUFF_203v2 or PUFF_205 or even the older PUFF_299. This is necessary, so you can see the 'ON' status. Do a software 'System reset' via Menu. Do a hardware reset. You should reach the 'ON' status of the receiver.
D. PUFF_LZMA CONVERSION and BIN Load. Follow the instructions in the 'Fwank7_puff_lzma103.doc'