Puff help please
|
Bronze Member Username: Gdog4637Post Number: 36 Registered: Jun-06 | after I downloaded the booting file 1.3 and loading the puff 206, my reciever been of PUFF,,,,,PUFF.....PUFF cycle for more than one hour without starting the reciever ON. I tried to redo the loading process, althoug I did it as per suggested steps, the reciever port will not open to any bin to download. your expert advice is needed .. | |
|
Silver Member Username: Jwl1Post Number: 357 Registered: May-06 | Is it actually rolling Puff or stuck on F? | |
|
Platinum Member Username: NydasPost Number: 14071 Registered: Jun-06 | Booting file 1.0.3 is related to loading PUFF_LZMA. It would say P.U.F.F.. not P U F F After you have loaded the Booting file 1.0.3 using the appropriate loader, you have to install the PUFF_LZMA BIN 206. This BIN is different from the PUFF BIN. All details, files and instructions are at: Note that there is an ECM on right now and we are waiting for PUFF_LZMA_207 FILE. You should be able to install the LZMA_206 BIN but it is not usable. Download and unzip into separate directory. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS. |
|
|
Bronze Member Username: Hockeycraze12000Post Number: 37 Registered: Nov-08 | youve got the knight rider lights, just turn it off from the back, then load the bin at the first p, it might not work the first time, but itll work eventually. | |
|
Silver Member Username: YashmatharuBrampton, Ont Canada Post Number: 249 Registered: Feb-06 | I am also getting P.U.F.F. rolling. What loader we should use for loading 206 file? | |
|
Silver Member Username: ViruscauserLeesburg, Georgia Post Number: 931 Registered: Mar-07 | Yash Matharu: What's the Bin you're trying to load? On receivers with the 1.0.3 Boot, you have to use the LZMA PUFF Bins, not the regular PUFF Bins. | |
|
Silver Member Username: JuanchoCANADA Xx Post Number: 453 Registered: Jun-08 | rollings puff without stop means boot 1,01, use bin 205 fmu and stara again using this boot. + bin 206 Lzma, this way you are ready for bin 207 LZMA here is the boot plus=
C/P Fwank7-PUFF-boot_Ver.1.0.3 For those that used the PUFF_VER1.0.1 boot already use this one insteads please. For those who have not used the PUFF_VER1.0.2 boot yet use this one instead also. If you already use the PUFF_VER1.0.2 boot all you have to do is. Open UkRoNiC's BOX Updater .421. Loader. Open PUFF_VER1.0.3 bin into Loader. Turn receiver ON and " LET RECEIVER FULLY BOOT UP TO ON or CHANNEL # ". Hit download on Loader. Write will complete in 10 seconds then receiver will reboot with P.U.F.F P.U.F.F. and come ON and thats it your done. Of course you will have to wait for a new bin to fix the freezing issues. For those that have not used the PUFF_VER`1.0.2 boot this is what you need to do. 1). Open UkRoNiC's BOX Updater .421. Loader. Open PUFF_VER1.0.3 bin into Loader. Turn receiver ON and " LET RECEIVER FULLY BOOT UP TO ON or CHANNEL # ". Hit download on Loader. Receiver will reboot with P.U.F.F. P.U.F.F. and will get stuck on " F. ". Turn receiver OFF from back switch. 2). Open Jvvh-Team-PUFF Loader. File, choose Fwank7_Jvvh-Team-PUFF_(Lzma)_V206 bin. Turn receiver ON and soon as you see the " P. ". Hit download on Loader. Write will complete in 2 minutes then receiver will reboot with P.U.F.F P.U.F.F. and come ON and thats it your done. Of course you will have to wait for a new bin to fix the freezing issues. When loading the V206 bin make sure it is the v206 bin that has (Lzma) in the bin name or your receiver will get stuck on " F. ". Remember i did send you two different V206 bins the right one was in the PUFF_VER1.0.2 folder. So I am attaching again the V206_(Lzma) bin you need to use or just wait for a new bin. Attached Files Fwank7-PUFF-boot_Ver.1.0.3.zip (18.0 KB, 252 views) __________________ |
|
|
Bronze Member Username: Gdog4637Post Number: 37 Registered: Jun-06 | thanks to everyone | |
|
New member Username: AzlanPost Number: 5 Registered: Apr-08 | i did a mistake. downloaded the puff-207 file direectly without using boot version 1, 2, or 3. now i m getting puff flashing continue. wat should i do now. plz help |
|
|
New member Username: Sonia25Post Number: 9 Registered: Jan-08 | can sum1one help me with my pansat well my pansat not wrking the power desnt turn on i dont see any light i dnt wut hapen can sumone tel me | |
|
Platinum Member Username: NydasPost Number: 14141 Registered: Jun-06 | rajput: Load the PUFF_205 or PUFF_206 (not LZMA) BIN. Let it reboot to show "ON". Then while "ON" load the 103 boot using the Ukr .421 loader. Then load the PUFF_LZMA_207 BIN. | |
|
Bronze Member Username: Patches123Post Number: 39 Registered: Jan-08 | When loaded Ver 1.0.3 bin using the UKr .421 loader, do you check the box that says "boot file"? | |
|
Platinum Member Username: NydasPost Number: 14142 Registered: Jun-06 | Boot file. Even if you choose something else, it will revert to BOOT | |
|
Bronze Member Username: Aissa_h, Post Number: 31 Registered: Mar-06 | Load boot 1.0.3 P.U.F.F do not stop to roll i load puff_205 as Nalin said nothing changed. it still roll. any idea ?? | |
|
Platinum Member Username: NydasPost Number: 14146 Registered: Jun-06 | aissa: You will have describe more details. What do you mean by roll? Does it top any time? What did you have before. What is the current BIN? When you saw F. why did you not turn off and then try to load LZMA-207. In other words, have looked at the insturctionsin detail? |
|
|
New member Username: AzlanPost Number: 7 Registered: Apr-08 | thanks a lot nalin | |
|
Bronze Member Username: Aissa_h, Post Number: 33 Registered: Mar-06 | no it does not stop P.U.F.F then P.U.F.F.... before used B75 then changed to puff boot. i did not see any F. i will try to load lzma-207 will see |
|
|
Silver Member Username: JuanchoCANADA Xx Post Number: 481 Registered: Jun-08 | Many ppl are confuse about " receiver stuck on F," 1) stuck on F. after loading boot 1.0.3. mean=waiting for bin 207 (LZMA) 2)stuck on F. after loading bin 207 (LZMA mean= wrong boot or bin .mean the boot 1.0.3 wasn't loaded. then you have to start with the 1.0.1 ukronic's fix and redo the 1.0.3+ 207 LZMA Rolling PUFF and stop on F. then start again on cycle= mean. you have to load the bin that you were using before the boot was loaded.( you have boot 1.0.1 )then use ukronic 1.0.1 fix bin |
|
|
Bronze Member Username: Aissa_h, Post Number: 34 Registered: Mar-06 | Thanks Nalin after load bin 207 P.U.F.F stopped to roll now every thing is ok |
UploadMain Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics