Why do I get double channels on my VS ultra?

 

Bronze Member
Username: Bowgator

Post Number: 22
Registered: Sep-07
Every time I do a blind scan or scan for channels I get double channels. I am using a viewsat ultra and the double channels one will have info of what's on the other will have no info. Can you please advise?
 

Silver Member
Username: Dharm_ram

Post Number: 165
Registered: Dec-07
go to channel organization and delete all the channels.

restart the blind scan again and see if you are still getting duplicate channels
 

Bronze Member
Username: Triple_x_tex

Post Number: 56
Registered: Feb-08
you get double channels cause you have the aids
 

Bronze Member
Username: Bowgator

Post Number: 23
Registered: Sep-07
I have done this about 20 time in the last year. Yes, everytime I delete the channels and do another scan I get double channels.
 

Bronze Member
Username: Triple_x_tex

Post Number: 59
Registered: Feb-08
no blind scan autoscan you moron
 

Platinum Member
Username: Nydas

Post Number: 14067
Registered: Jun-06
Edit and save under channel master. Then you can reuse the list.
 

Bronze Member
Username: Triple_x_tex

Post Number: 61
Registered: Feb-08
SHUT UP NALIN
 

Bronze Member
Username: Bowgator

Post Number: 24
Registered: Sep-07
I have done an auto scan as well as blind scan, but it still comes out the same double channels. Where is the channel master?
 

Bronze Member
Username: Bowgator

Post Number: 25
Registered: Sep-07
I have done an auto scan as well as blind scan, but it still comes out the same double channels. Where is the channel master?
 

Gold Member
Username: Plymouth

Canada

Post Number: 7128
Registered: Jan-08
Rich

You have no choice because Dn send 2 frequency one with picture and sound and another with channel info.
 

Bronze Member
Username: Bowgator

Post Number: 26
Registered: Sep-07
Ok, so what your saying it's normal to have two of the same channel one with the tv listing and the other with no info ( with the same channel number).
 

Silver Member
Username: Timscarlet

Usa

Post Number: 321
Registered: Feb-05
I sometimes do a factory default to erase channels, to a hard reboot, then do a factory default again, and hard reboot, to clear memory of channels. hopefully this works for doubling up of channels on your end.
 

Gold Member
Username: Plymouth

Canada

Post Number: 7129
Registered: Jan-08
Tim
Sometimes if we want channel EPG and be able to listen the channel, we have no choice.

On viewsat you delete the satellite for
deleted the channels and you do a
autoscan with the auto Tp "off".


 

Silver Member
Username: Jay_w_grayson

Prague, Oklahoma USA

Post Number: 352
Registered: Jul-08
Rich Lee...Try Tim's post

I sometimes do a factory default to erase channels, to a hard reboot, then do a factory default again, and hard reboot, to clear memory of channels.

Now do a Blind Scan


hopefully this works for doubling up of channels on your end.
 

Gold Member
Username: Plymouth

Canada

Post Number: 7131
Registered: Jan-08
FTA Trou du C ul
Doing a factory default delete all satellites channels and duplicated channels happen on 61.5W. only.

When you get over 25 satellites as for me you don't do a factory default.

Learn idiot
 

Bronze Member
Username: L_k_live_s

POST: 100 mi...

Post Number: 13
Registered: Jan-09
Plymutt you are an IDIOT 24 hours a day 7 days a week. But I guess you cant help It cause your just a frenchfry from Quebec.
 

Platinum Member
Username: Nydas

Post Number: 14068
Registered: Jun-06
Warthog: YOU are a WART on this forum, and should be eradicated.
Let Plymouth and others help as they want to, without your interruptions.
 

Bronze Member
Username: Louwho31

Post Number: 59
Registered: Nov-05
If you have two sats set for the same antena settings then when you scan stations they will see them twice..are you set for two sats and if you factiory reset then scan only one sat doe you get dups.. ?? also i have been getting dups in the mid 300's as stated above they are listed with no info in the channel guide and have a slightly different Name of station.. good luck
 

Silver Member
Username: 3dges

Compton

Post Number: 132
Registered: Feb-08
This use to happen to me I just do what everyone else does Factory Default then Auto Scan and it gets rid of double channels.
 

Gold Member
Username: Plymouth

Canada

Post Number: 7136
Registered: Jan-08
On viewsat you delete the satellite for deleted the channels in channel scan delete with garbage can , do setting in antenna setting then do a autoscan with the auto Tp "off".

The only duplicated channels are channels moved, but on one you have the EPG and the other you have the true channel.

« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us