Lequynhnhu: 1. Your receiver - original name? 2. Conversion and conversion type? BOOT version and BIN version. 3. What loader are you using? 4. What BIN or BOOT are you trying to load?
For those that used the PUFF_VER1.0.1 boot already use this one insteads please. For those who have not used the PUFF_VER1.0.2 boot yet use this one instead also.
If you already use the PUFF_VER1.0.2 boot all you have to do is.
Open UkRoNiC's BOX Updater .421. Loader. Open PUFF_VER1.0.3 bin into Loader. Turn receiver ON and " LET RECEIVER FULLY BOOT UP TO ON or CHANNEL # ". Hit download on Loader.
Write will complete in 10 seconds then receiver will reboot with P.U.F.F P.U.F.F. and come ON and thats it your done. Of course you will have to wait for a new bin to fix the freezing issues.
For those that have not used the PUFF_VER`1.0.2 boot this is what you need to do.
1). Open UkRoNiC's BOX Updater .421. Loader. Open PUFF_VER1.0.3 bin into Loader. Turn receiver ON and " LET RECEIVER FULLY BOOT UP TO ON or CHANNEL # ". Hit download on Loader.
Receiver will reboot with P.U.F.F. P.U.F.F. and will get stuck on " F. ". Turn receiver OFF from back switch.
2). Open Jvvh-Team-PUFF Loader. File, choose Fwank7_Jvvh-Team-PUFF_(Lzma)_V206 bin. Turn receiver ON and soon as you see the " P. ". Hit download on Loader.
Write will complete in 2 minutes then receiver will reboot with P.U.F.F P.U.F.F. and come ON and thats it your done. Of course you will have to wait for a new bin to fix the freezing issues.
When loading the V206 bin make sure it is the v206 bin that has (Lzma) in the bin name or your receiver will get stuck on " F. ".
1. You could try Blacklist Updater 1.4. 2. However, it might just be the fact that you have no channels scanned. Scan a sat and even if you can't see TV, the P.U.F.F.. should go.
My receiver is Pansat 2500A. I did convert it to 2700. Currently, I use buff v206 bin. I did a conversion using Ukr buff flash fix. Now, I use uploader UkRonic updater.421 to load version 1.0.3 bin, but it gave me ER1. Did I miss any steps, Nalin?
Lequynhnhu: You may not be doing the right thing. You must turn on your receiver and let the receiver fully boot to "ON" position before attempting to install 1.0.3.
this came from ftabin a member wrote this jj74 is offline New Member
Join Date: May 2008 Location: prestonsburg,ky Posts: 11 Rep Points: 1 jj74 has a low reputation
Thumbs up new fix is out for 2700 i just got a new fix for 2700 and it works good got it at 12:58 pm today i tested it and it is a all go works great i do not know how to put a bin on this site or even if the mods would let me do it if they would i will be happy to share it is #v 203api_femu temp fix _ __________________