Motorized Dish?

 

Bronze Member
Username: Little_bear

Sudbury, Ontario Canada

Post Number: 95
Registered: Mar-08
With a 36" Motorized Dish System
from North of Ontario what satellites from East to West would be within my limits?
 

Gold Member
Username: Plymouth

Canada

Post Number: 6642
Registered: Jan-08
I you buy a HH-120 motor with it

Approx. 15.0W to 148W
 

New member
Username: Eddylives

Post Number: 1
Registered: Dec-08
Was just wondering????
How many true free to air channels there are to be had out there
Running a 33" pan with a invacom circular linear lnb , microyal h2h motor.
123 has about 15-20 regular cable type channels (never bothered to count them)
In the northwest ontario region.
Set the system up a month ago but I am just starting to mess around with it over the holidays here
And yes I have been doing my homework through sites like lyngsat lol.
Just hoping to hear from someone with more experience

Later
 

Gold Member
Username: Plymouth

Canada

Post Number: 6657
Registered: Jan-08
John Smith

I can get over 300 channels Free to Air from 129W to 15W, many new Free to Air channels are added in the last 2 months.

 

New member
Username: Eddylives

Post Number: 2
Registered: Dec-08
How do I find out which birds are circular/linear?
And which transponder to use to find signal and run a channel search?
I have been looking at a few sat. sites like lyngsat and have not been able to figure that out yet

Thanks
 

Gold Member
Username: Plymouth

Canada

Post Number: 6661
Registered: Jan-08
John
Check on Lyngsat .com on Tp you can see a V for Vertical H for Horizontal, R for Right and L for Left.
V and H are Linear
L and R are Circular

All Circular satellite should be set on Standard and 11250, but 118.8 use 10750.
All Linear satellites should be set on standard and 10750 or Universal 10750 High and 10600 Low.

You must try different Tp and if you get signal your dish can be aimed and you do a blind scan then a autoscan for get maximum channels.

A motorized dish is very hard to aimed but when it's done you will never want a standard dish.
 

New member
Username: Eddylives

Post Number: 3
Registered: Dec-08
Thank you very much......
I have not had much luck in finding clear info. or being able to figure out how lyngsat works
 

Gold Member
Username: Plymouth

Canada

Post Number: 6662
Registered: Jan-08
John you are Welcome

If you need help again just ask me.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us