The receiver 2500 needs to be converted to puff - if not done already. --------------------------------------------- If you have 2700 use v203 for the pansat 2700
PUFF_203 full EMU for FLU/2500 Conversion to 2700 Full kits for Latest conversion BINs and other files - also for Revert to 2500 PUFF_203 full EMU version
[link removed]
Download and unzip into separate directory. PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS. Please note, you may need to rescan
All these sites ALWAYS have the latest files, bins, how to's, manuals, guides, dish pointing calulators and tips, hardware info, jtag info, newbie and getting started sections, actively moderated with a no troublemakers and no bashing allowed policy.. and are free, and only require a simple free registration...Your email info is kept private, unless U specify differently..and U will be notified via email of any replies to any questions U may ask (or U can shut that feature off, if U like)..and your IP is sacred and never released..
Many of these specialize in particular FTA receivers as noted next to their links..USE those for your particular receiver manufacturer..
If U want real info, trouble free, no costs, friendly help, no hassles, latest files and manuals, then use these...these are well established, and have a long history, and are the best known sites throughout the entire DSS community now...
Ecoustics is NOT a Dss site, since is has NO files, no manuals, no guides, little info, no specific categories, and is almost impossible to find anything because every thread here has been allowed to be hijacked (because no mods are active) and the Subject does not relate to the posts within it....also Ecoustics is basically an Electronics site for home audio, television, DVDs, stereo's, and things of that nature, NOT FTA satellite information .
So again I highly recommend using ANY of these sites BELOW!....U pick one and use it for fast , friendly info and files, and many of these also have a LIVE chat area what U can get an IMMEDIATE response from reliable knowlegeable sources!...U will save yourself much time, especially if you are a newbie to this hobby!...and most all also will have the latest keys posted as well, and the keymaster, keyripper, key grabber utility files to download as well....and if plastic is your thing , some also have an area for that as well as FTA..Good Luck and enjoy this hobby!
FTA View [link removed] (all receivers) Data Viewing Sequences [link removed] ( Conaxsat and all receivers) FTA Bins [link removed] (C00LSAT and All receivers) FTA For All [link removed]
Cut and Paste these into your browser: REMOVE the * in links below: These are the larger sites,and therefore Ecoustics has blocked their names and active links..
[link removed] [link removed] [link removed]
or get Keymaster 4.0 here free and NO registration is required... [link removed]
Best TV Guide site www.sharpc.com Relevant Product Infoo say.
I installed the latest file Fwank7_Jvvh-Team-PUFF_V203(V-2). Howeve, I still dont dont see anything. What's the troubleshooting process? Thnaks in advance. welcome back Nalin. I hope you had nice vacation time.
The Fwank7 PUFF_203V2 works. After installing the BIN: 1. Note down your user and antenna settings. 2. Delete all chanels and doa system reset. 3. Power down. 4. Power up and do user settings. 5. Do Antenna setup for one Sat, and do a Blind scan. 6. At the end of scan you should see the picture. 7. Do other antenna set ups and scan. 8. Do your channel editing and parental controls and favourites. 9. Save this under channel master. 10. Watch TV.