Can't load bin to CW 600S
|
Silver Member Username: KellergirlOrlando, FL Post Number: 109 Registered: Sep-07 | I am trying to load the new freeze fix to my CW 600S, and it will not load. I press start, and nothing. I have tried the bins from 4 different sites, and none will load. Is any one else having this problem? Thanks. | |
|
Gold Member Username: PlymouthCanada Post Number: 6535 Registered: Jan-08 | Kellergirl Switch off on back panel, press font button and hold then power on on back panel, now you will see "boot" relaese front button then try to download the file.  |
|
|
Silver Member Username: KellergirlOrlando, FL Post Number: 110 Registered: Sep-07 | That's not working. I don't understand..I just loaded a bin last week, and it worked fine. Now it is not loading anything.  |
|
|
Silver Member Username: KellergirlOrlando, FL Post Number: 111 Registered: Sep-07 | I tried a new cord, and that's not working either. Could it be my box? | |
|
Gold Member Username: PlymouthCanada Post Number: 6537 Registered: Jan-08 | Kellergirl I don't think your box is broke. Do you have a message? Which loader you use? |
|
|
Silver Member Username: KellergirlOrlando, FL Post Number: 112 Registered: Sep-07 | I use the CW loader, v1.05. I don't get an error message, it just doesn't start loading. | |
|
Gold Member Username: PlymouthCanada Post Number: 6538 Registered: Jan-08 | Do you use a USB to serial cable? |
|
|
Silver Member Username: MrgregOnt. Canada Post Number: 272 Registered: Dec-07 | Is your patch enabled.F1 000.If it is try loader v1.07. | |
|
Silver Member Username: KellergirlOrlando, FL Post Number: 113 Registered: Sep-07 | Yes, I am using the same cable I always use, and I have never had a problem before. | |
|
Gold Member Username: PlymouthCanada Post Number: 6545 Registered: Jan-08 | Kellergirl Is it a CW 600S or 600S Premium? |
|
|
Gold Member Username: PlymouthCanada Post Number: 6546 Registered: Jan-08 | Try this loader 1.07 as Greg says |
|
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2292 Registered: Dec-06 | set up the serial cable. Assuming your back switch is off at this point turn if to ON. Let the receiver do its thing till the channel number is displayed. Now with your remote turn the receiver OFF After the time is displayed either --:-- or what ever time it is (eg: 10:45) now you are in standby mode. Use what ever loader you have. Check what com ports are open, 1 is most common. If your using a USB serial cable try com 3 or what ever one is open. Here is a utility to check for open com ports on your computer.
|
|
|
Silver Member Username: Mohamad_obamaTerhan, Iran Iran Post Number: 270 Registered: Oct-08 | Great post Doreen. | |
|
Gold Member Username: PlymouthCanada Post Number: 6549 Registered: Jan-08 | Doreen i had same problem with loader v1.05, since i use v1.07 i have no problem at all. |
|
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2296 Registered: Dec-06 |  Moh... Plymouth there's a new loader out called CW600 Premium new interface.exe May work on CW600s but not sure...use at own risk... works for me on CW600P  newest bin files (fix freezing)Dec 19, 2008 CW600S_Premium_V2.15.zip CW600S_Regular_V2.11.zip |
|
|
Gold Member Username: PlymouthCanada Post Number: 6551 Registered: Jan-08 | Doreen i use this one on picture, as you i don't knowi if it work for 600S. |
|
|
Silver Member Username: KellergirlOrlando, FL Post Number: 114 Registered: Sep-07 | Nope, the loader didn't work. I am guessing it is my cable, will try another one tomorrow. | |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 2309 Registered: Dec-06 | kellergirl cables do break ...pins missing or bent... check that out first b4 buying a new one | |
|
Gold Member Username: PlymouthCanada Post Number: 6568 Registered: Jan-08 | Good luck |
|
|
Silver Member Username: KellergirlOrlando, FL Post Number: 115 Registered: Sep-07 | Thanks |
UploadMain Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics