Philips HDTV -replaced bulb, still doing the same thing

 

New member
Username: Philips

Post Number: 1
Registered: Dec-08
Hello, I have a Philips HDTV 50".

The model no. 50PL9126D/37

The picture went black and the red light icon came on. There was still sound, but no picture. After turning it off and letting it cool down, I turned it back on and had a picture for about 10 minutes, then it did the same thing.

Warranty had expired just a couple of weeks earlier.

I replaced the bulb, however, it still does the same thing.

It blinks out a code - 6 long, 5 short.

I do hear a quiet "zzzzz-zzzzz" sound in the same area where the bulb goes in (just below it) before the picture goes black.

That part # is "EUC 132d P/41".

After, doing a lot of research, that part is the ballast.

However, the problem I have now is Philips only sells it with the light engine and the lamp....

$1795.00

So, I'm looking for a ballast that will work without having to buy all the other parts.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us