After loading this bin and reciever reboots you will lose your channels so do the following.
Load Fwank7_Jvvh-Team-PUFF_V202_F_EMU to reciever.
After write is complete reciever will reboot with No Channel List. English ( OK on remote) Antenna Setup settings should still be there. Blindscan first Sat (EX. ECHO 7), after channels come in Exit out to Picture. " Reboot Reciever ". Put in Antenna Setup settings for second SAT (EX.ECHO 8,10). Blindscan second Sat, after channels come in Exit out to Picture. Should be good to go..
If that fails try the following.
Push Menu on remote. System Reset ( 0000 ). After reciever reboots to ON. Put in Antenna Setup settings for first SAT (EX. ECHO 7). Blindscan first Sat, after channels come in Exit out to Picture. " Reboot Reciever ". Put in Antenna Setup settings for second SAT (EX. ECHO 8,10).
Blindscan second Sat, after channels come in Exit out to Picture.
Should be good to go.. Attached Files Fwank7_Jvvh-Team-PUFF_V202_F_EMU.zip (428.6 KB, 8 views) Fwank7_Jvvh-Team-PUFF_V202_F_EMU_SW-21.zip (428.6 KB, 0 views) Jvvh-Team-PUFF_V202_(FULL JTAG)_Flash.zip (504.5 KB, 1 views)