|
New member Username: Jojo313233Post Number: 2 Registered: Dec-08 | I have 2 dishes at home one pointing 61.5 with one lnb, other dish is pointing 110/91.5 with 2 lnbs (one for 91.5,other for 110). Is any way I can get the channels from 118.9 or 148w from the above dish/lnbs.( without adjusting/adding djsh/lnbs) I m thinking if i change some settings in the FTA receiver (CW800S), I could get 118.9 or 148.. |
|
Gold Member Username: Saqeeb9000Post Number: 4372 Registered: Oct-07 | m not possbile they are at different angles, 61.5 means dish is at 61.5 degree angle, same with other dishes, unless u have motorized dish which can rotate, u don't have any choice but to move the dish, also with 118.7 u need specail lnb and 33 inch dish, 148 is same as 61.5 i am not sure why u wanna get it anyways , on other hand 118.7 have few more channels than 61.5 (int) |
|
Gold Member Username: JustforhahasPost Number: 1563 Registered: Jul-08 | Take the 61.5 dish and re-aim it at 110W...take the 91 (Bev) and 110 dish that you have now, and get a new 118.7/119 LNB and re-align that dish...then connect those LNB signals using a disque switch...there is really NO other way without getting a new LNB for the 118.7 and realigning BOTH dishes.. OR you could just buy this new dish which has the LNB's for all 3, the 110, 118.7, and the 119...and install and align this, and get rid of your 2 dishes.. http://transatelectronics.com/store/33inch-dish-for-110-1187-and-119A°w_P321 THEN U must re-input correct new antenna/dish settings into the receiver and do new scans.. |