What should i do Nalin?

 

Bronze Member
Username: Kaanwal

Windsor, Ont Canada

Post Number: 20
Registered: Sep-08
As u said i first download the 299bin than try it wth both V201frank,V201 ukr jvvh but its like started flases puf ,puf again and again can u help me wth that.
 

Gold Member
Username: Justforhahas

Post Number: 1503
Registered: Jul-08
c/p fwank7

V201_Full_EMU works good but has same issues as everyone else and that's when you reboot receiver you get rolling PUFF...

If your receiver is not by the computer, soon as download is complete and you see the first" P " turn the receiver OFF...
Then hook it up and power it on but don't turn it OFF again or it will go to rolling PUFF.

end c/p

So to recap...

Load V201_Full_EMU
Let the box reboot, but power off when you see the first 'P'..
Hook up to TV and power on...do NOT shut OFF
All should be ok!
 

Platinum Member
Username: Nydas

Post Number: 13492
Registered: Jun-06
If you are going to use the new PUFF_201 BINs, you will have to accept some limitations. NOTE that this applies to PUFF BINs on 2500/FLU conversions

Rolling PUFF workaround...


c/p fwank7

V201_Full_EMU works good but has same issues as everyone else and that's when you reboot receiver you get rolling PUFF...

If your receiver is not by the computer
, soon as download is complete and you see the first" P " turn the receiver OFF...
Then hook it up and power it on but don't turn it OFF again or it will go to rolling PUFF.

end c/p

So to recap...

Load V201_Full_EMU
Let the box reboot, but power off when you see the first 'P'..
Hook up to TV and power on...
All should be ok!

Then DO NOT SWITCH IT OFF!!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us