Anik F3 lost
|
New member Username: MegaftaPost Number: 1 Registered: Dec-08 | I lost Anik F3 118w from the satellite list. I see Anik F3 360 now. I use to watch Gemini indian telugu channel before but now i lost it. Please help me in getting back 118. |
|
|
Silver Member Username: LomnaPost Number: 411 Registered: Dec-07 | Very strange. Did you delete that accidently ? I guess, you need to get back it back my friend. Use lnb fequency10750 or lower, first tp 11715 and do blind scan. I have learnt this recently.Good luck! | |
|
Platinum Member Username: NydasPost Number: 13392 Registered: Jun-06 | The name does NOT matter. The name does NOT matter. The name does NOT matter. If you are pointing to the sat and have the correct settings, you do a blind scan and get it. |
|
|
Silver Member Username: LomnaPost Number: 412 Registered: Dec-07 | YES SIR ! | |
|
New member Username: MegaftaPost Number: 2 Registered: Dec-08 | i don't see 118.7.  How to get back that one? |
|
|
Silver Member Username: LomnaPost Number: 413 Registered: Dec-07 | You WON'T see 118.7 until you point your dish towards it AND blind scan it with lnb feq 10750 first tp 11715. It will resolve the issue here. | |
|
New member Username: MegaftaPost Number: 3 Registered: Dec-08 | Thanks Devin for the response. So, do i need to blind scan on Anik F3 360 with LNB Freq 10750 and Tp 11715? I use to see Anik F3 118.7 before but now i see Anik F3 360. Please suggest me. |
|
|
Silver Member Username: LomnaPost Number: 414 Registered: Dec-07 | Yes, try that. you won't loose anything. like nalin said "name does not matter ? Let us know. | |
|
New member Username: MegaftaPost Number: 4 Registered: Dec-08 | i did a blind scan on Anik F3 360 with loew frequencies and i see the channels in the guide/list [Gemini, Teja, Maa TV etc..,] but no picture.., it is doing autoroll processing for ever. Please help |
|
|
Silver Member Username: LomnaPost Number: 415 Registered: Dec-07 | GOOD, You got some success. I think now you need some kind settings at dish setting's screen ? Post your settings info here. | |
|
New member Username: MegaftaPost Number: 5 Registered: Dec-08 | Here are my settings 3 working and 1 not working: Satellite - EchoStar 7 119.0W {WORKING} LNB Power - on LNB Type - OCS-DP LNB Freq. - 11250 22KHz - on TP Freq - 12224 DiSEqC 1.0 - Port 1 Motor - Off Legacy SW - None Satellite - EchoStar 10,11 110.oW {WORKING} LNB Power - on LNB Type - OCS-DP LNB Freq. - 11250 22KHz - on TP Freq - 12224 DiSEqC 1.0 - Port 2 Motor - Off Legacy SW - None Satellite - EchoStar 3 61.5W {WORKING} LNB Power - on LNB Type - OCS-DP LNB Freq. - 11250 22KHz - on TP Freq - 12268 DiSEqC 1.0 - Port 3 Motor - Off Legacy SW - None Satellite - Anik F3 0.0E {NOT WORKING} LNB Power - on LNB Type - OCS-DP [tried with 'Standard' also] LNB Freq. - 10750 22KHz - on [tried with 'Off' also] TP Freq - 11715 DiSEqC 1.0 - Port 4 [tried with 'None' also] Motor - Off Legacy SW - None |
|
|
Gold Member Username: PlymouthCanada Post Number: 6092 Registered: Jan-08 | MegaFta Which receiver, switch and LNB you use?  |
|
|
New member Username: MegaftaPost Number: 6 Registered: Dec-08 | I am using View Sat Ultra reciever. How to know which switch and LNB i m using? I have Dish network two dishes outside my house. And i get Gemini and Maa from Dish network. I want to get these channels using my new viewsat reciever now. |
|
|
Platinum Member Username: NydasPost Number: 13398 Registered: Jun-06 | There are three general types of LNBs that get 118 and 119. 1. The old ones before the days of 118, - the 119 LNB will pick up some 118 channels IF the Dish is 30" or larger. THIS IS NOT THE IDEAL, but I am mentioning it to be complete. With the above settings, you need to set DisEqC 1 for 118, not 4 or none. 2. The new Dish Pro plus LNBs with two outlets. You need to get the two outlets to two different ports of DisEqC switch. See the picture below.
Notice the two separate outlets for 118 and 119? You need to connect them separately to two port od your DiseqC and use those port numbers and set your antenna settings accordingly. However, the DiseqC switch may not work properly and you many need to use a DP44 switch. 3. The generic 118/119 LNBs come with two outputs, but each of them carries both 118 and 119. So with these you need to use the same DisEqC switch port in the antenna settings for both 119 and 118 and take only one cable from the LNB to the switch. However, you have to use LNB type Standard or Universal2. This type of LNB works well with DisEqC switches. Although the information you have posted is very good and more than most people give it is not complete in terms of the LNB types. Please continue your efforts and hope the above information/guidelines will help. |
|
|
Gold Member Username: PlymouthCanada Post Number: 6102 Registered: Jan-08 | MegaFta If you use a Dp dish and LNB your settings is right, but if you use generic LNB set your LNB Type on standard. You set 22Khz to "ON" only if you use a DP LNB. Go in Menu, Installation, Antenna settings and choose Anik F3 then select Motor to Usals and press arrow up and enter 118.8 then down arrow and Enter, it give you the good position for Anik F3, Exit and save. Go in Channel scan and delete with garbage can all those satellite Echo 3, Echo 7, Echo 10,11(6, 8 or 8, 10)and Anik F3 then exit and save. Now do settings on each satellites and blind scan it one by one. If it not work try it: Go in Menu System information Code Menu Select Nagra Down arrow then select 00 01 00,01 01 00 and 01 06 00 and delete those 3 dish provider with "F3" on remote and load latest bin file, save and exit, wait with autoroll to "ON" than the autoroll found keys and do a autoscan on each satellites. |
|
|
Bronze Member Username: ThermongodPOST: 617 Post Number: 16 Registered: Dec-08 | beware of bad fta websites like ftabin.net ftatalk.com heres a list of bad sites that will fry your reciever. safe forums for pansat : [link removed] [link removed] http://www.satfix.com |
|
|
New member Username: MegaftaPost Number: 7 Registered: Dec-08 | PlyMouth - I followed your instructions and went to Menu, Installation, Antenna settings and choose Anik F3 then select Motor to Usals and press arrow up and enter 118.8 then down arrow and exit and save. But in the Antenna list it is showing as Anik F3 241.2W not 118.8. I did a blink scan did'nt work. i did the other thing you told me to delete 00 01 00,01 01 00 and 01 06 00 still it didn't work. I see the channels in the guide but it is doing AutoRoll Processing.... for ever. Please help!! |
|
|
Bronze Member Username: L_k_live_sPOST: 100 mi... Post Number: 11 Registered: Dec-08 | MegaFta If you use a Dp dish and LNB your settings is right, but if you use generic LNB set your LNB Type on standard. You set 22Khz to "ON" only if you use a DP LNB. Go in Menu, Installation, Antenna settings and choose Anik F3 then select Motor to Usals and press arrow up and enter 118.8 then down arrow and Enter, it give you the good position for Anik F3, Exit and save. Go in Channel scan and delete with garbage can all those satellite Echo 3, Echo 7, Echo 10,11(6, 8 or 8, 10)and Anik F3 then exit and save. Now do settings on each satellites and blind scan it one by one. If it not work try it: Go in Menu System information Code Menu Select Nagra Down arrow then select 00 01 00,01 01 00 and 01 06 00 and delete those 3 dish provider with "F3" on remote and load latest bin file, save and exit, wait with autoroll to "ON" than the autoroll found keys and do a autoscan on each satellites. |
|
|
Gold Member Username: PlymouthCanada Post Number: 6160 Registered: Jan-08 | MegaFta Be sure than the autoroll is on and wait on a channel 5 to 10 minutes. If it not work try it: Do a factory default and load this Factory file: [link removed] And the satellite info: [link removed] And the latest bin file: [link removed] Now do a blind scan on 110W then do a autoscan, your receiver will be like a brand new. |
|
|
New member Username: MegaftaPost Number: 8 Registered: Dec-08 | Plymouth - Thank you so much for the help...! It is working perfectly after loading the factory file, satellite info, and the latest bin file and do a blind scan...! As you said.., my reciever is like a brand new piece now..! Now i know whom to contact if i get any issues in future. Thanks.., Thanks.., Thanks.., Thanks..! |
|
|
Gold Member Username: PlymouthCanada Post Number: 6182 Registered: Jan-08 | You are Welcome MegaFta |
UploadMain Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics