CW600s No Channels and no Pictures

gus Silver Member Username: Fortec16 CANADA Post Number: 200 Registered: May-06	Posted on Friday, November 21, 2008 - 01:57 GMT Hi, Can anyone help me. I have CW600S and Yesterday its stop working and today when I move the channels its all greenish and not clear pictures??? When I click on setup nothing is show on the screen.Instalation nothing on the screen. I trun the patch on and off still same.???
Mr. Wizard Bronze Member Username: Tooter Post Number: 43 Registered: Oct-08	Posted on Friday, November 21, 2008 - 02:08 GMT A good place to start would be to put the 600s into boot mode and load the factory bin and see if any problems clear.
Plymouth Gold Member Username: Plymouth Canada Post Number: 5870 Registered: Jan-08	Posted on Friday, November 21, 2008 - 02:10 GMT Start with a hard reboot
gus Silver Member Username: Fortec16 CANADA Post Number: 201 Registered: May-06	Posted on Friday, November 21, 2008 - 02:14 GMT I tried the reboot? How do I do the Boot Mode?
gus Silver Member Username: Fortec16 CANADA Post Number: 202 Registered: May-06	Posted on Friday, November 21, 2008 - 02:16 GMT Is this the correct file? Captiveworks 600s Factory file v1.14 :
Mr. Wizard Bronze Member Username: Tooter Post Number: 45 Registered: Oct-08	Posted on Friday, November 21, 2008 - 02:27 GMT Thats the factory latest bin-- boot mode -- with 600s off at the back switch .. press and hold the front power button on 600 and turn on from the back--- release front button when it says Boot load the fatory bin good luck --
Plymouth Gold Member Username: Plymouth Canada Post Number: 5873 Registered: Jan-08	Posted on Friday, November 21, 2008 - 02:41 GMT Switch on back panel
gus Silver Member Username: Fortec16 CANADA Post Number: 204 Registered: May-06	Posted on Friday, November 21, 2008 - 02:56 GMT I tried the boot mode nothing happen. Is my Box have an issue? It was working and suddenly its act like this?
Plymouth Gold Member Username: Plymouth Canada Post Number: 5876 Registered: Jan-08	Posted on Friday, November 21, 2008 - 03:29 GMT Gus Do as Mr. Wizard says Factory file is available at captiveworks.com
gus Silver Member Username: Fortec16 CANADA Post Number: 213 Registered: May-06	Posted on Friday, November 21, 2008 - 04:18 GMT tried. bad quality pic. only work one channel for ppv preview}
Plymouth Gold Member Username: Plymouth Canada Post Number: 5883 Registered: Jan-08	Posted on Friday, November 21, 2008 - 04:23 GMT Gus Are you able to download the factory file?
Greg Silver Member Username: Mrgreg Ont. Canada Post Number: 139 Registered: Dec-07	Posted on Friday, November 21, 2008 - 05:04 GMT Gus, here is the info to load your cw600s. ~~http://ftaforall.info/forums/showthread.php?t=450~~

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us