Can

 

New member
Username: Pugluvr

Post Number: 1
Registered: Nov-08
hello I can not get all the PPV channels im only getting 4 of them I scanned all ecostar can someone please help me
 

Silver Member
Username: Viruscauser

Leesburg, Georgia

Post Number: 804
Registered: Mar-07
Need more details: What receiver, antenna Diseqc settings....
 

New member
Username: Pugluvr

Post Number: 2
Registered: Nov-08
viewsat ultra lite, lnb type - standard
frq - 11250
tp frq 12224
diseqc - none
legasy off



I have tried setting my tp to 12239 but after i save and go back it still says 12224
 

New member
Username: Pugluvr

Post Number: 4
Registered: Nov-08
viewsat ultra lite, lnb type - standard
frq - 11250
tp frq 12224
diseqc - none
legasy off



I have tried setting my tp to 12239 but after i save and go back it still says 12224
 

Platinum Member
Username: Nydas

Post Number: 13154
Registered: Jun-06
PPVs are on 110W (Echo 10/11)
You must post the type of LNB you have - at least the name on the LNB and the Dish.
 

New member
Username: Pugluvr

Post Number: 5
Registered: Nov-08
oh im not sure what lnb i have, but its a Bell dish dual lnb I scanned all echos
 

Platinum Member
Username: Nydas

Post Number: 13157
Registered: Jun-06
1. If you were scaning Bell (82/91) and turned your dish to get DN (110/119), most likely you turned it only 19 degrees and not 28 degrees as required. Make sure you are pointing to 110/119
119W
LNB type dsc-dp
LNB freq 11250
DisEqC switch 1.0 - 1
First TP 12239 H
Full scan or Blind scan

110W
LNB type dsc-dp
LNB freq 11250
DisEqC switch 1.0 - 2
First TP 12224 V
Full scan or Blind scan

The above settings are on the presumption that you have the Dish type of LNB used by many in Canada for Bell.

You can try standard LNB
 

New member
Username: Pugluvr

Post Number: 6
Registered: Nov-08
ok thank you very much i will try it
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us