Need help

 

Silver Member
Username: Ariza

Post Number: 281
Registered: Feb-06
I'm going to attempt to convert my ariza 700 to a pansat 2700

i need someone to post instructions, and knows how to convert receivers to help me out with this operation lol

any takers?

PS. I have a VS Plat too.
 

Gold Member
Username: Donnie1973

Post Number: 3066
Registered: May-06
nalin knows these. ask her directly
 

Silver Member
Username: Ariza

Post Number: 282
Registered: Feb-06
ok
 

Gold Member
Username: Justforhahas

Post Number: 1193
Registered: Jul-08
Original fugley/aairon conversion...ariza 700 - pansat 2700

This is the complete conversion with two methods first simple, second one a couple more steps but sure fire.

As some can't use skymax. very detailed pdf with trouble shooting section.

aairon/fugley.

P.S. Have fun. all files needed included everything but the jtag cable.


http://www.dssrookie.com/forums/b-font-color-990033-ariza-7xx-to-2700-files-font -b/original-fugley-aairon-conversion-227312.html
 

Gold Member
Username: Justforhahas

Post Number: 1194
Registered: Jul-08
Ariza 700 Conversion to Pansat 2700a

http://www.dssrookie.com/forums/b-font-color-990033-ariza-7xx-to-2700-files-font -b/ariza-700-conversion-to-pansat-2700a-170995.html

--------------------------------------------------------------------------------

Hello to all,

Here is the fixed up conversion Files and info

Ariza_convert_Pansat2700a.part1.rar

Ariza_convert_Pansat2700a.part2.rar

1. **Turn off power switch at the back**

2. Unscrew Ariza top cover, there will be a JTAG connection beside the LED Display.
Pull up the two tabs holding the front cover on and pull forward

3. Unplug the White IR remote reciever plug attached to the mainboard
there is a lock that locks it to the connector you must press on the side towards the front
**Do not force the plug, it will come out easy**

4. Plug in JTAG cable, PIN number one is on the LED Display side **Very important!**

5. Unrar Ariza_convert_Pansat2700a.rar

6. Open Ariza_convert_Pansat2700a folder then Jtag 700 Conversion folder

7. switch power on from back

8. Open Wall.exe in Jtag 700 Conversion folder,
If you get an error "Could not acquire I/O Windows NT/2K users must have administrative rights"
Then Right click on wall.exe go to properties, compatibility tab, compatibility mode,
click box"Run the program in compatibility mode for:" then select Windows 98/Windows Me
click apply and open wall.exe again

9. Click Refresh Items in wall.exe program

10. Leave wall.exe running

11. In Ariza_convert_Pansat2700a folder, open Jtag 700 Conversion folder open unlock.exe

12. In unlock.exe click file>preferences. In preferences window, JTAG Interface needs to be
Parallel port, Parallel Port settings 0x378. Click OK

13. In unlock.exe click IRD Model pull down menu and select STi55xx_2M.
If options are greyed out and JTAG Info, Device ID =0x00000000 Device = Unknown device,
then check your JTAG Connection. Check that power is ON and JTAG Cable is correct.

14. Click Flash Programming, A window will pop up ignore the instructions, just click ok.

15. In the window "Flash Programming"
Set IRD/Flash Selection, IRD Model = STi55xx_2M, Flash = Flash Dump (Full),
Set Chip/Sector Programming = Full

Click Unlock, a window will ask you want to "Erase whole flash?" Click ok.
Click on Unlock and erase whole flash 3 times.

16. Leave unlock.exe running

17. In Jtag 700 Conversion folder, open Jkeys folder, In Jkeys folder open jkeys.exe

18. In the jkeys.exe click file>preferences. In preferences window, JTAG Interface needs to be
Parallel port, Parallel Port settings 0x378. Click OK


19. In jkeys.exe
Set IRD Info, IRD Model = STi55xx_2M
Set Save Memory, Region = Flash Dump (Full)
Click on Flash Programming, A window will pop up ignore the instructions, just click ok.

20. In the window "Flash Programming" **jkeys.exe**
Set IRD/Flash Selection, IRD Model = STi55xx_2M, Flash = Flash Dump (Full),
Set Chip/Sector Programming = Full
Click Erase, a window will ask you want to "Erase whole flash?" Click ok.
Click on Erase and erase whole flash 3 times.

21. Click program under Chip/Sector Programming **NOT UNDER SINGLE LOCATION PROGRAMMING**
A window will pop up "Program at address 0x7FE00000, size 0x200000
Click Yes, then select file "VorteX 2700 Factory Flash.bin" located in the jkeys folder.
Click Open, It should take 3 Mins to Program the "VorteX 2700 Factory Flash.bin"
When done Click OK

22. Turn power off at the back of Ariza
Unhook JTAG cable
Plug in Serial Null modem cable
Turn power on at back
close jkeys.exe, Unlock.exe, Wall.exe

23. In Ariza_convert_Pansat2700a folder open "GTRom Loader v27.02.exe"
Under tools click BIN File, open "2700.bin" and click Download
when download is complete under Tools Click BIN File, open"b75_m.bin" in Ariza_convert_Pansat2700a folder,
and click Download
When download is complete close "GTRom Loader v27.02.exe"
Turn power off at back

24. In Ariza_convert_Pansat2700a folder open "Blacklist STB UPDATER 1.3.exe"

Select BIN, Click BROWSE, in Ariza_convert_Pansat2700a folder, Open "jvvh_209_pwT.bin"
put the mouse cursor over Fix! turn power on at back
wait untill you see the 8 going accross the front LED Display then click "Fix!"
within 2 seconds of the first 8
Wait for download to complete then turn off power at back

Select BIN, Click BROWSE, in Ariza_convert_Pansat2700a folder, Open "jvvh_211_pwTd.bin"
put the mouse cursor over Fix! turn power on at back
wait untill you see the 8 going accross the front LED Display then click "Fix!"
within 2 seconds of the first 8
Wait for download to complete then turn off power at back

Select BIN, Click BROWSE, in Ariza_convert_Pansat2700a folder, Open "jvvh_217_pTd_GC.bin"
put the mouse cursor over Fix! turn power on at back
wait untill you see the 8 going accross the front LED Display then click "Fix!"
within 2 seconds of the first 8
Wait for download to complete then turn off power at back

Select BIN, Click BROWSE, in Ariza_convert_Pansat2700a folder, Open "jvvh_Ukr_220.bin"
put the mouse cursor over Fix! turn power on at back
wait untill you see the 8 going accross the front LED Display then click "Fix!"
within 2 seconds of the first 8
Wait for download to complete then turn off power at back

25. Unhook everything, plug the IR Remote connection back in
Put the front cover back on **note the hook on the bottem of front cover**
plug everything into your TV and set up system
Do blind scans of sats. You will notice is that your display shows 8's on it
dont worry about it
 

Silver Member
Username: Ariza

Post Number: 283
Registered: Feb-06
Thanks a bunch. I'm fairly new to this (learning more and more) and i was just wondering what a JTAG was? I'm planning to make a trip down to my local computer store and buying one, but thought i'd consult you before doing so.

Cheers.
 

Silver Member
Username: Ariza

Post Number: 284
Registered: Feb-06
ps. Do i need to open up the receiver to put to hook up the jtag?
 

Gold Member
Username: Justforhahas

Post Number: 1206
Registered: Jul-08
yes U need to open up the receiver...and locals store will prolly not sell a Jtag cable...ya need to make one yourelf or find a site online that sells em...google is your friend..

This is NOT a task for a newbie...or weak of heart..many experienced cannot do this..if ya like electronics and playing and don't mind maybe killing your receiver, go for it!...otherwise, buy an inexpensive conaxsat mini..
 

Silver Member
Username: Albino_midget

Post Number: 704
Registered: Jul-06
Yes you need to open the receiver, i don't think local computer stores carry them.

The cable is like the one here at..

EBAY- Item number: 140270555585
 

Silver Member
Username: Ariza

Post Number: 285
Registered: Feb-06
yes U need to open up the receiver...and locals store will prolly not sell a Jtag cable...ya need to make one yourelf or find a site online that sells em...google is your friend..

This is NOT a task for a newbie...or weak of heart..many experienced cannot do this..if ya like electronics and playing and don't mind maybe killing your receiver, go for it!...otherwise, buy an inexpensive conaxsat mini..
--------------------

I don't mind playing with the receiver. Ariza is a dead receiver as it is.

I have some pretty neat computer stores in my vicinity, so i'll ask them for one.

I'm just not sure where to insert it once i open the receiver. Once i do that, should be very easy.

The instructions on the pdf. file were very straight forward once you got the jtag right.
 

Gold Member
Username: Justforhahas

Post Number: 1209
Registered: Jul-08
hey, you have the ball...now you run with it!...good luck!
 

Silver Member
Username: Ariza

Post Number: 286
Registered: Feb-06
Okay, i'll keep you updated lol

btw have you ever converted a receiver before?
 

Gold Member
Username: Justforhahas

Post Number: 1213
Registered: Jul-08
I suggest you use the sites and links I gave ya where you can discuss with MANY people, any questions or problems that U may incurr..they have a discussion area just for this conversion..
 

Platinum Member
Username: Nydas

Post Number: 13059
Registered: Jun-06
You will get a better qulaity response and information if you go to the Ariza section in discussion and in Files of

[link removed]

They filter out trash.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us