i have a creative works cw-600s satellite receiver. so i have to cable to upload to information to the receiver and the driver for the cable is installed. i start the uploading program, select the file i want to upload, then i select the port and click start. once the little screen on the receiver had an "8" flash across but thats all. it stays at zero percent on the uploading program and no errors come up.
The cw-600s needs to be put in standby mode (--:--) to download the bin.
With cable to lnb disconnected , reboot the stb after it reboots press the power button on either the remote or the front panel of stb to get to standby mode --:--, start download