What the heck
|
Bronze Member Username: RbhoopPost Number: 40 Registered: Jun-06 | When i point to echo 8 10 and do sat scan i get bev channel list??? |
|
New member Username: SatmenPost Number: 8 Registered: Nov-08 | obviously you didn't point to echo 8 , you can download a channel list under any sat profile but it doesn't mean you hit the correct bird , turn north and lower |
|
Gold Member Username: PlymouthCanada Post Number: 5465 Registered: Jan-08 | Switch on another port |
|
Gold Member Username: JustforhahasPost Number: 1105 Registered: Jul-08 | echo 8 is now at 77W |
|
Platinum Member Username: NydasPost Number: 12954 Registered: Jun-06 | Echo 8 is replaced by Echo 10/11 at 110W. so you will be scanning Echo 10,11 when you scan the old Echo 8,10 location. |
|
Gold Member Username: JustforhahasPost Number: 1112 Registered: Jul-08 | Nalin ...quit stalking me...NO, I won't fock you!...ask plymouth to fock you! |
|
Bronze Member Username: Jay_w_graysonPrague, Oklahoma USA Post Number: 78 Registered: Jul-08 | ron hoger Bronze Member Username: Rbhoop Post Number: 40 Registered: Jun-06 Posted on Monday, November 10, 2008 - 07:29 pm: -------------------------------------------------------------------------------- When i point to echo 8 10 and do sat scan i get bev channel list??? 8 & 10 is now 10/11 EchoStar 4 at 77.0°W and EchoStar 8 at 77.0°W and no Bev is dead and was never on Echo 8/10 ron hoger I see that you Registered: June 16, 2006 just before Nalin Nyda did he supply you with the above info? |
|
Gold Member Username: PlymouthCanada Post Number: 5468 Registered: Jan-08 | Haha idiot 110W is 110W not 77W Stop your non sense info |
|
Bronze Member Username: Lk_live_sPOST: 100 mi... Post Number: 34 Registered: Oct-08 | Plymutt Idiot your nutin but a two bit frenchfry why you hide Quebec now are you embarrased about where u come from ho. |
|
Platinum Member Username: NydasPost Number: 12959 Registered: Jun-06 | 110W is 110W That's where Echo 8,10 was and is now Echo 10,11 |
|
Gold Member Username: PlymouthCanada Post Number: 5471 Registered: Jan-08 | szot aka youg LK aka El Kay We know now that you are the Lieutenant Kendall son So watch out |
|
Bronze Member Username: Lk_live_sPOST: 100 mi... Post Number: 35 Registered: Oct-08 | Your mistakin Plymouth im not a racist. I think all people are equal. Exept for the french i think we should throw them all out of Canada. They are ALL stupid |
|
Gold Member Username: JustforhahasPost Number: 1115 Registered: Jul-08 | "When i point to echo 8 10 and do sat scan i get bev channel list???" Echo 8 and Echo 10 are 2 DIFFERENT satellites... http://www.lyngsat.com/america.html 77.0°W EchoStar 8 Galaxy4r Echostar 4 110.0°W EchoStar 10 EchoStar 11 DirecTV 5 |
|
Platinum Member Username: NydasPost Number: 12961 Registered: Jun-06 | Justforhaha's is attempting to confuse the issue. Except for perhaps some of the latest receivers, all receivers show Echo 8,10 in antenna setup. This refers to 110W. The new name for it is Echo 10,11. Only a week ago Echo 8, the physical, sat moved to 77W. All the channels that were on Echo 8,10 are now on Echo 10,11. Q.E.D. |
|
Bronze Member Username: SatmenPost Number: 13 Registered: Nov-08 | Who gives a sh.it , the point is he wants DN but got BEV channels, obviously a pointing problem , he stated that in his first sentence , you're a dumb fu.cking paki , no matter how you cut it you can't comprehend the most basics of this language |
|
Gold Member Username: JustforhahasPost Number: 1121 Registered: Jul-08 | All Echostar satellites are Dishnetwork! Ignore that hoar nalin and plymouth.. |
|
Gold Member Username: JustforhahasPost Number: 1123 Registered: Jul-08 | Re-Aiming your dish antenna to another provider: by - Grandpooba - 2008-02-08 Your receiver has the ablities to receive B3v but you are currently aimed at DN, or you are aimed at B3v and want DN. The first thing that you do is goto a satellite aiming site, this is the one I like to use http://www.satcalculator.net For this excerise we will be re-aiming the dish from 91W nimiq 1 to 110W Echostar 8/10, However the procedure will work for DN to B3v. You get the Elevation readings for your current satellite that your dish is aimed at (91W), and the readings for the desired new satellite (110W). Example from San Francisco California USA: Changing from 91W Nimiq 1 to 110W Echostar 8/10; Using the satellite aiming site, we have found the following; Elevation for 91W Nimiq 1 is 35.3 degrees Elevation for 110W Echostar 8/10 is 44.3 degrees NOTE: these readings will vary as to location, you MUST get the readings for YOUR location. You would subtract the larger elevation from the smaller elevation, 44.3 deg. minus 35.3 Deg. = 9 Degrees DIFFERANCE. Now goto your dish antenna and MARK IT, Dish collar to the pole, and elevation dish to the elevation scale with a sharp pen or fine point "Magic marker', so you can return to the original settings. You should have your receiver or satellite finder setup to read Strenght indication for the new satellite 110W. Assuming you are currently aimed at 91W Nimiq 1, read the Elevation scale on the dish and write it down,it ideally would be at 35 Deg. however these scales can be incorrect. To re-aim at 110W, you would add the 9 Degrees difference to the reading you have taken from the dish. If you read 37 degrees and add 9 Deg. you would have 46 degrees on the scale. So set the dish elevation for 46 Degrees. To aim the azmuth, we are aimed at 91W, we know that from the northern hemisphere facing South the lower orbital numbers are to your left and higher to your right. To re-aim the dish we want to move the dish 19 degrees to the right. The elevation is set at 46 Deg. the collar and elevation setting has been marked so we can return to the original settings. We now loosen the dish collar and turn the dish to the right I have found that 10 degrees is about 1/8 inch of distance on a standard 1 5/8 inch dish pole, so for 19 degrees it would be about 1/4 of a inch from the original pole markings, turning the dish to your right w/pole in your belly. S-l-o-w-l-y move the dish left and right ontil you peak the reading, verify that you are receiving 110W on the satellite dish setup screen, lock the dish collar with the collar locking bolts. Repeat the peaking process for the elevation, and lock it. You can go from 110W to 91W using the same procedure, but turning the dish to the left and re-aiming the elevation. --------------------------------------------------------- Next... just input the new antenna LNB and sat settings into the receiver, do new scans, let EPG populate and wait for keys to AR... and watch V |
|
Platinum Member Username: NydasPost Number: 12973 Registered: Jun-06 | Justforhaha's is attempting to confuse the issue. Except for perhaps some of the latest receivers, all receivers show Echo 8,10 in antenna setup. This refers to 110W. The new name for it is Echo 10,11. Only a week ago Echo 8, the physical, sat moved to 77W. All the channels that were on Echo 8,10 are now on Echo 10,11. If you are getting BEV channel, your Dish is obviously pointing to BEV. You will have to point it to a Dish Satellite. Try one of these sites to find your pointing angle etc. [link removed] |
|
Gold Member Username: JustforhahasPost Number: 1128 Registered: Jul-08 | STFU nalin....U R confused..he didn't know what echo 8 was..and had dish aimed wrong, and at Bev..so I helped him on both matters..so FOCK OFF HAJI HOAR! U are useless as usual, and a DN MOLE...disrupting EVERY post we make here to help others! |
|
Gold Member Username: PlymouthCanada Post Number: 5481 Registered: Jan-08 | Ron listen Nalin Justfortobeidiot's is a troublemaker here |
|
Bronze Member Username: SatmenPost Number: 14 Registered: Nov-08 | nalin only scum pakis and dumbs indians believe your posts . I ansewered his post correctly the first time and any nonesense paki babble was just a reflection of your ignorance really does it matter if he downloaded it under echo 2000 , he wanted DN that was the point you failed to understand , you couldn't even understand the fundementals of his problem and when you got called out for being a dumb paki you had to get plymouth |
|
Silver Member Username: Fakeman1Germantown, Maryland USA Post Number: 139 Registered: Jul-08 | Again you are right G.I. Joe I think they are the same friends that she gave the Globecast keys too. You remember the ones that don't steal. She ask for no money, and they gave no money, work it out in a trade.  |
|
Platinum Member Username: NydasPost Number: 12980 Registered: Jun-06 | justforhaha's: This is what the guy said: "When i point to echo 8 10 " GO LOOK AT YOUR RECEIVER, IF YOU HAVE ONE AND YOU WILL SEE ANTENNA SETTING SOFR ECHO 8 10 - WHICH WOULD BE 110 DEGREES. Q.E.D. |
|
Bronze Member Username: SatmenPost Number: 17 Registered: Nov-08 | who cares stupid , he said "when I point to ehco 8 I get BEV. the problem was in the point, not the settings. u too dumb to know you are trying to disect it to cover up your stupidity and lack of knowledge and down right stupid paki response |
|
Platinum Member Username: NydasPost Number: 12981 Registered: Jun-06 | Joe Nydas: first decide if you are joe Nydas or justforhaha's. You seem to have an identity crisis |
|
New member Username: MartinoPost Number: 1 Registered: Nov-08 | If anyone can please tell me why everytime I go into antenna setup im trying to go to Nimiq 1,3 my satellite jumps to echostar 7 and it won't stay on bev it stoping me from getting any channels. Im new to this website please help if u can ? "thank you""very much" |
|
Gold Member Username: PlymouthCanada Post Number: 5496 Registered: Jan-08 | chris Nimiq 1 is gone on N3, don't lose your time  |
|
Platinum Member Username: NydasPost Number: 13004 Registered: Jun-06 | Always go to "home site of your receiver" first. The sites in BOLD offer direct downloads without registration. [link removed] - VIEWSATS [link removed] - Ariza and Pansat Conversions and Clones [link removed] - Pansats, Viewsats, Sonicview [link removed] - CaptiveWorks. [link removed] - Nfusion Other reliable sites: [link removed] |
|
Bronze Member Username: SatmenPost Number: 28 Registered: Nov-08 | I noticed the lists of sites where you are welcome has shrunk |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics