I have just installed 33" Dishnetwork for English and Indian Channels, I got all English Channels but missing with Indian Channels(Low quality) LNB is DIGIWAVE -- DGL-1189S RF: 11.70/12.20GHz IF: 950/1450MHz LO: 10.75GHz
My LNB Settings are: Echostar 9 121.0W Eco 7 119.0W LNB Power On ON LNB Type Universal Universal LNB High 10600 11250 LNB Low 9750 9750 TP Freq 11724 12224 DisEqc 1.0 None None Motor off off Legacy SW None None
instead listen to plymouth , who has no life, no identity, can't admit the color of his skin , doesn't know his mother, father in dog pound and has no agenda other than to stand up for NALIN the pedophile and pirate from Canada
Guys: I thought this site is to help with Satellite problem, but here I am seeing criticising each other, I just need expert advise about my problem, if anyone can provide me I will be thankful to him.
Last time Plymouth Helped me a lot with problem with satellite...so I think Plymouth can help me again.
My LNB Settings are: Echostar 9 121.0W Eco 7 119.0W LNB Power On ON LNB Type Universal Universal LNB High 10600 11250 LNB Low 9750 9750 TP Freq 11724 12224 DisEqc 1.0 None None Motor off off Legacy SW None None
sidhu preet ji looking for indian channels are not on 121 they are on 118 west (but channels are usually scanned under 119 echostar 7 west)so if you scan for indian channels and get them and they are freezing two things are possible either dish size is small especially signal fades when it is cloudy weather for this 118 west satellite so bigger size of dish better strength and quality u will have.Other thing you have to adjust little bit from 119 west towards 110 side not 121 side.Forget about catching 121 no indian channels on it.Your lnb setting would be standard freqency 10750 .it is much better if you have small tv and put outside watch a channel and adjust dish for better strength and quality.More over adjust lnb skew that helps a lot too.try best of luck.Need more help ask me plz.
Sidhu: Essentially you are doing the right thing. You are right in using the 129 slate or any other convenient slate for getting the Anik 3 at 118.7W. If you are pointing to 119W and getting the channels for 119 than your Dish is correctly pointing to Anik3 at 118.7W.
The problem might be that you should scan 118.7 first i.e wherever you have used the 118.7 settings you have already described, should be scanned first. You should do a blind scan if available - otherwise an all scan. Also you might like to try 10750 high and low and Universal or standard. If everything else fails, then in your Anik3 slate (using either 129W or Anik1) and 119 scan removed, put in all the Anik3 TPs from Lyngsat and do a all scan. I must stress again to use 118.7 scan first before scanning 119. Please post again after several trials.
Nalin: If you read my previous posting you can see I said that Indian Channels are freezing and all other English Channels are working fine.... If you have the solution pelase tell me
Sidhu Try it go in key menu and delete all Dn provider with F3 on remote and reload latest bin from ftahq.com and wait with autoroll ON on a channel(5 to 10 minutes)
Do as Plymouth says. Except for some possible problem from using a 30" instead of 33" Dish, the instructions I have given for scans should work flawlessly. If you post your zip code, we can try and decide whether 33" is a must.
I have just installed 33" Dishnetwork for English and Indian Channels,}
Nalin Nyda Platinum Member Username: Nydas
Post Number: 12940 Registered: Jun-06 Posted on Monday, November 10, 2008 - 09:15 am:
-------------------------------------------------------------------------------- Do as Plymouth says. Except for some possible problem from using a 30" instead of 33" Dish,
Postal Code for Area is L5V 2A9. Anik F3 scans the Indian Channels but are freezing...Quality is very poor for Anik F3. Do I have to move little bit more towards 118, as 119 is working fine.
Sidhu Preet as you can see Nalin can't help you but he is saying that a sales person at Transat Electronics can.
I don't think so, you will be wasting your time. In the first place they only sale FTA TV hardware and no supplier in that business will help you to steal satellite signal.
you failed for 3 days and now you're sending him to a store in toronto
you call that help you coward immigrant , you should be shot in the head like all other pakis. I bet the people at the store share the same logic and problem solving skills as you. none
