CaptiveWorks cw-600 S
|
Bronze Member Username: MatiPost Number: 22 Registered: Apr-08 | Hallo Dear Sir, I have loaded bins many times before and had no problem. But this time after i loaded it asked to reboot. I choose yes and then when it reboot there was a green background and the numbers on the box show 0000. I tried turning it off from the back and pulling out the plug. I still get the screen..... Any suggestions on what to do? Regards, Eugene |
|
Gold Member Username: PlymouthCanada Post Number: 5185 Registered: Jan-08 | Hi yugene Load this factory bin with the cable: http://captiveworks.com/software/CW600SV1.14_Recorder_2_20_07.bin If it not work, do it: power off with switch on back panel and press and hold front button and power ON with rear switch on back panel, you must see "Boot" on display now send the file. After load the latest file with the USB port.  |
|
Bronze Member Username: MatiPost Number: 23 Registered: Apr-08 | My CAptiveWorks cw-600S Crashed After loding new bin, Who can help me find a Factory bin file for my CaptiveWorks cw-600s Best Regards, |
|
Gold Member Username: PlymouthCanada Post Number: 5189 Registered: Jan-08 | yugene Here is the factory bin http://captiveworks.com/software/CW600SV1.14_Recorder_2_20_07.bin |
|
Bronze Member Username: MatiPost Number: 24 Registered: Apr-08 | Plymouth I can see the menu, I put inthe factory bin file, but the tv stay green. Please Advise. Regards, Eugene |
|
Gold Member Username: PlymouthCanada Post Number: 5216 Registered: Jan-08 | Yugene Put the latest bin file Dont forget to enable the patch with F1 000 with remote. |
|
Bronze Member Username: MatiPost Number: 25 Registered: Apr-08 | Plymouth Thank you for your advice, Now it is t' 2 clock am , tomorrow i will contact to you again, Best Regards, Eugene |
|
Gold Member Username: PlymouthCanada Post Number: 5219 Registered: Jan-08 | Right Good night |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics