Viewsat 2000 ultra

 

Bronze Member
Username: Dragonfly2

Post Number: 23
Registered: Jul-07
i have a viewsat v2000 ultra and in order to get some of the channels i have to turn the receiver off then back on. i don't have to do this to all the channels just a few. anyone have a fix for this?
 

Gold Member
Username: Plymouth

Canada

Post Number: 5038
Registered: Jan-08
jelly bean

Go on Viewsatusa.com and load it with your USB key:

Factory file:
[link removed]
Satellite info:
[link removed]

and load the latest bin file
 

New member
Username: Saxman8837

Post Number: 2
Registered: Oct-08
Did your viewsat work with the files? I just got one and all I get is nasa from fta menu
 

Gold Member
Username: Kirankumar

NO Bashing

Post Number: 3013
Registered: Oct-07
what viewsat do you have ? and have you loaded the latest file?
also your antenna settings may be wrong
give us all the info so we can help
 

Platinum Member
Username: Nydas

Post Number: 12556
Registered: Jun-06
The sort of problem you are experiencing is universal amongst all the receivers, of different intensity and frequency at different times and with different BINs.
The usual and the best solution is to load the factory BIN, then the latest BIN and then rescan.
 

New member
Username: Saxman8837

Post Number: 3
Registered: Oct-08
VS 2000 ultra
loaded VIEWSAT_ULTRA_V0143.zip 3 or 4 times.
Then this U009_plat-xtreme.zip

I do a auto scan on, 119 chanels seem to be there but when I go to them they have like yellow/orange $ at the end. I see only 2 that does not and they work. I did notice after scan was 100% i notice failed all the way to the right,

7 , 119 was what my original was pulling from. what am I missing?
I've used the loader the usb methed, seems to load but when doing chanel scan and the end where once said locked it say failed and end when it at 100% and ask if i want to save.


I believe I tried all the sats 1,2 - 8,10 I used this file DBPSW-080929P.PGM it went on fine.
 

Platinum Member
Username: Nydas

Post Number: 12559
Registered: Jun-06
Please confirm to us that you are unzipping before loading the files.
 

Platinum Member
Username: Nydas

Post Number: 12560
Registered: Jun-06
There are three different (and more) Viewsat files

PFTAUSW-080929U '" Viewsat ultra
PFTAUSW-080929UL '" Viewsat ultra lite
DBPSW-080929X '" Viesat extreme 2000
 

New member
Username: Saxman8837

Post Number: 4
Registered: Oct-08
Yes they go on thru usb, I scan same thing don't thingk I've tried 292X
 

New member
Username: Saxman8837

Post Number: 5
Registered: Oct-08
I believe I've tried
PFTAUSW-080929U '" Viewsat ultra
PFTAUSW-080929UL '" Viewsat ultra lite
as I remembered the lite took and the ultra said wrong file img
 

Platinum Member
Username: Nydas

Post Number: 12562
Registered: Jun-06
DBPSW-080929P is a Viewsat platinum file.

The four receivers mentioned are all made by Viewsat but the files are not interchangeable.
 

New member
Username: Saxman8837

Post Number: 6
Registered: Oct-08
Ok then what file should I use for this box?

It's VS 2000 Ultra what will make it work?

Tried:
PFTAUSW-080929U this says wrong img file

PFTAUSW-080929UL loads but same issues.
Just loaded DBPSW-080929X going to give a shot
 

New member
Username: Saxman8837

Post Number: 7
Registered: Oct-08
Maybe this means somthing, after scanning auto scan.

Total 29 freq S/R Pol FEC

Processing 29 12545 21500 v 2/3 failed

this is what i see when auto scan it will say Locked then when finished and it ask do i want to save i notice where it use to say locked it says failed.

I've been going at this for about 1 day 1/2 now .

This is seeming like a bad dream!
 

Platinum Member
Username: Nydas

Post Number: 12565
Registered: Jun-06
If you are sure it is a Viewsat Ultra, you should use u files.
Sometimes there is confusion because Viewsat Ultra is also know as Viewsat 2000 Ultra, and a person can get confused with the Viewsat 2000 extreme which is a different receiver and takes the x file.
You only know what receiver you have and you should use the latest factory BIN for it followed by the latest BIN for it.
Look at [link removed], and go to the Viewsat discussions section and then to Viewsat files section and look around a bit.
 

Gold Member
Username: Plymouth

Canada

Post Number: 5056
Registered: Jan-08
Gordon
are you sure it is a true Viewsat and not a clone?
 

Gold Member
Username: Plymouth

Canada

Post Number: 5057
Registered: Jan-08
You must use this one:
PFTAUSW-080929U

If it's a new receiver you must load those files before:


Factory file:
[link removed]
Satellite info:
[link removed]

 

New member
Username: Saxman8837

Post Number: 8
Registered: Oct-08
Ok I'll this again, load viewsat_ultra_ v0143, then u009_plat-xtreme.

So what are the opkeys? this is what someone posted back that i need
 

New member
Username: Saxman8837

Post Number: 9
Registered: Oct-08
When loading this:PFTAUSW-080929U thru usb. It will not take.
Says wrong img file!
 

Gold Member
Username: Plymouth

Canada

Post Number: 5059
Registered: Jan-08
Gordon
do a hard reboot and download and unzip this file with winrar:

[link removed]
 

New member
Username: Saxman8837

Post Number: 10
Registered: Oct-08
Thanks Don't need winrar I have it, maybe I'll try to use the loader to load this file.
 

Gold Member
Username: Plymouth

Canada

Post Number: 5060
Registered: Jan-08
Try a hard reboot before
 

Bronze Member
Username: Saxman8837

Post Number: 11
Registered: Oct-08
Ok I loaded with the loader, it's getting better! now at least the chanel line up shows, instead of just Ech..-01 ect...

Ok I see now all is GOOD!

Thank you soo! much, if you need any help computer wise send email , that what I do for living

Wow
 

Gold Member
Username: Plymouth

Canada

Post Number: 5062
Registered: Jan-08
Good news my friend.
You are Welcome
Thanks for your help on computer.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us