Help aligning twin lnbs with sat. finder meter

da-neegha Silver Member Username: Daneegha Post Number: 139 Registered: Oct-06	Posted on Tuesday, September 16, 2008 - 17:24 GMT I'm installing a dikh 500 with twin lnbs to get 110 and 119. When I have the meter hooked up to the lnb, it will pick up excellent signal. 110 will come up nicely but when I scan 119 nothing happens.
sada Gold Member Username: Saqeeb9000 Post Number: 3844 Registered: Oct-07	Posted on Tuesday, September 16, 2008 - 17:39 GMT Nalin Nyda Platinum Member Username: Nydas Post Number: 11656 Registered: Jun-06 For 119W scan,change to LNB type: Universal or standard LNB Freq.: 11250 First TP: 12224 (V) or 12239 (H) Do a full or Blind scan.
da-neegha Silver Member Username: Daneegha Post Number: 140 Registered: Oct-06	Posted on Tuesday, September 16, 2008 - 17:53 GMT Thank you! I will try that and post with results.
King Tapeman Gold Member Username: Tapeman New York City in-HD, NY Post Number: 3464 Registered: Oct-06	Posted on Tuesday, September 16, 2008 - 19:24 GMT When yo install twin LNB Yo must assign Twin LNB-1 to 119 and Twin LNB-2 to 110 They both can be on same port Also skew angle for both sats can be obtained here: http://satcalculator.freehostia.com
da-neegha Silver Member Username: Daneegha Post Number: 141 Registered: Oct-06	Posted on Tuesday, September 16, 2008 - 19:51 GMT I got it, Thanks, all it was is skew was slightly off. my skew must be @ 80.5 degs. 45.9 degs. of elevation and 168 degs. of azimuth. My fta is a CW 800. Thank you all!!!
sada Gold Member Username: Saqeeb9000 Post Number: 3846 Registered: Oct-07	Posted on Wednesday, September 17, 2008 - 17:00 GMT u are welcome

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us