Just bought a VIEWSAT ULTRa 2000

 

Silver Member
Username: Rekman

Mntl-Quebec-...

Post Number: 421
Registered: Jun-06
Hi friends...
I just bought a Viewsat Ultra 2000..
now I need your Help...
where can I get the
1. Pro-Loader..
2. Keys grabber software
3. and other stuff for the viewsat ultra 2000

PLEASE HELP ME.
thank you...
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3858
Registered: Jan-08
Good choice MKM my friend
For now you dont need Loader

just download bin file and unzip with winrar and load it in USB key and load with USB in receiver.

[link removed]

Load this Sateliite info(with USB key):

[link removed]

You dont need key grabber with viewsat

Here is the loader for Ultra( only for dead box):

[link removed]

Good TV
 

Silver Member
Username: Rekman

Mntl-Quebec-...

Post Number: 422
Registered: Jun-06
OK Plymouth I went on MENU and went on USB.. and have been able to read the USB info...
Now what should I do??
I dont know any site where I can have information for viewsat..
Do you know any ??..
I want to know the actual BIN for Viewsat Ultra 2000..
where would I get it...

Foufffffffff... lots of stuff to configurate on the receiver....
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3859
Registered: Jan-08
MKM

This is the bin file

[link removed]

Download and unzip this file and load it on USB ke yand with USB load it in receiver.

This is one of best receiver for fta with many option.

Here is the manual:

[link removed]

If you help just ask


 

Silver Member
Username: Rekman

Mntl-Quebec-...

Post Number: 423
Registered: Jun-06
Plymouth... am getting lots of problem...I cannot know how to set the frequencies...
how to set the ANTENNA SET UP
when you go to INSTALLATION - ANTENNA

SET UP... ???
SATELLITE:????
LNB POWER:????
LNB TYPE:????
22 KHZ:????
TP FREQ:???

how should it read???

WHEN i WAS with cools*t 5000.My dish was pointing...to ECHOSTAR 61.5 the level AND quality was GREEN ...
I only change the receiver to the new VIEWSAT ULTRA 2000... BUT it quality was RED LOW LEVEL & QUALITY..
how come huh!!..
SINCE the receiver green with cools*t How come its red with viewsat???..
please help...
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3860
Registered: Jan-08
MKM

61.5

LNB Type -standard
LNB Freq -11250
22Khz -Off
Tp freq - 12355

Exit and save and do a blind scan in menu installation

Gie me Signal and quality (70%)

 

Silver Member
Username: Rekman

Mntl-Quebec-...

Post Number: 424
Registered: Jun-06
Ok Plymouth
tomorrow I gonna move the dish ..

should I set the receiver before moving the dish??..
or move the dish till I get green quality & level .. THEN I set the receiver...????..
Ok.. come to you tomorrow,
bye thanks....
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3868
Registered: Jan-08
MKM
Explain me green quality, you must see number. Viewsat interface is different

Yes you must use setting i give you before.

I check tomorrow if you need help.

Good luck
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us