Justforhahas , I need your help Please

 

Bronze Member
Username: Elperrodemacao

Post Number: 78
Registered: Oct-05
I already bought a sv 360 premier that you sugested and i also followed the steps as you said, but when i unziped the bin i did all the steps but when i get to the step that says "Highlight file and press OK button to download." this file does not apear. it only shows front and rear as an option but i never see the file that i have to highlight. thanks for you help.
 

Gold Member
Username: Kirankumar

NO Bashing

Post Number: 2916
Registered: Oct-07
are you using a usb stick to download,and did you unzip the file?
 

Bronze Member
Username: Elperrodemacao

Post Number: 79
Registered: Oct-05
yes, im using usb 1G and i already unziped the last file.
 

Gold Member
Username: Kirankumar

NO Bashing

Post Number: 2920
Registered: Oct-07
is your usb stick formatted to fat32
if not delete all info on it and format it to fat 32,then download file to it and insert into receiver
 

Bronze Member
Username: Elperrodemacao

Post Number: 80
Registered: Oct-05
how can i formated it to fat32??
 

Silver Member
Username: Kingsatman

James McPhuck

Post Number: 361
Registered: Nov-07
Yo flash it like this

Upload
 

Gold Member
Username: Rtap

FL

Post Number: 2236
Registered: Jan-07
read this and follow instruction
http://oldfiles.org.uk/powerload/fat32/fat32.htm

Setup for Sonicview 360 Premier

Loading

Download and unzip file and put it on your USB stick
Insert the USB drive into the front USB port of Sonicview 360 Premier
Press Menu; Choose PVR; Choose USB Drives; Press OK; Highlight file and press OK button to download.
After the receiver downloads and reboots take your USB out, turn off from back, count to five and turn back on.

Set Time, Locals, Autoroll, Parental Control

Press Menu; Choose System Settings; Choose Time Settings; Choose your time zone exit.
Press Menu; Choose System Settings; Choose User Options; Set all to ON Choose your local and exit.
Press Menu; Choose System Settings; Choose Parental Conrol; 0000; Set all to OFF, and ACC to Disable.

Scanning

Press Menu; Choose Installation; Choose Dish Setting

******** 7
OCS DP
11250
12224 or 12239 TP
Port 1

Press the red button to scan the satellite save when done

******** 8,10
OCS DP
11250
12224 TP
Port 2

Press the red button to scan the satellite save when done
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us