i've heard people do it themselves but i dunno how to do this so can some1 help me i have pansat 2700 can somebody give me the latest bin and instructions on how to do this
i don't have a pansat,but assuming you have and original 2700 and not a converted one,then you would download latest file to your desktop,and unzip it.you would also download 2700 loader to desktop and unzip it. now you would turn your receiver off and hook up the rs 232 cable that came with the receiver to the computer and receiver.open loader,bring in uzipped file and hit download and at the same time turn receiver on from the back. do not power receiver off until download is complete.
sorry you can find all files and loader at www.ftabins.net just register there it is free and if you go to the pansat forums you will get more help if needed good luck
1.download loader v27.02 and download current bin and extract bin from zip file 2.open loader and press select bin and choose the correct bin 3.have 2700 on and connected via nullmodem cable not db9 cable to computer 4.hit download and wait when complete check your settings in antenna setup and make sure all is ok 5.have autoroll on,scan your birds and watch tv. good luck