Nalin Help Please

 

Bronze Member
Username: Muzmurad

Post Number: 16
Registered: Apr-05
Hi,
I have a viewsat extreme and a cw600s Premium and I recently installed satellite 91 for bev (Nimiq1 1). I can view bev on the cw but am unable to view it on the vs. It always says autoroll processing.

I have tried everything I can think of. I checked the settings of my satellite, rescanned the satellite about 5 times, I changed the switch, I even put on the factory bin reset to factory settings and loaded the latest bin (07/30/08 from [link removed]). But it is still not working.

Can you please advise me on what to do. Your help will be greatly appreciated!

Thanks
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3020
Registered: Jan-08
try it:
All viewsat box
Go to Code menu
Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00
Delete this 3 provider one by one with F3 on remote
"NEW" do same thing with all provider on Bev provider
09 07 00
09 06 00
09 05 00
09 01 00
08 01 00
no need to delete keys
load last bin for your box
turn autoroll on
Keep on
Bin and autoroll regenerete keys
Resolve problem with lost channel , autoroll, freeze and search signal


"Dont load factory bin"

Thats erase bad data in the box
For box who lost channel and sat setup
ENJOY TV



Reply if it work
Please
 

Silver Member
Username: Gregraf

Post Number: 994
Registered: Dec-07
Have you had the viewsat working before?
When u load bin do you wait for the reciever to say insert and then end before shutting it off?
It your main menu in installation where it says Nimiq 1 does it say nimiq 1 in the top corner also? Viewsat extreme has got to be the easiest box to get going.
 

Bronze Member
Username: Muzmurad

Post Number: 17
Registered: Apr-05
I only get 09 01 00 and 08 01 00 as provider ids could that also be a problem?
 

Bronze Member
Username: Muzmurad

Post Number: 18
Registered: Apr-05
I tried what you said above Plymoth. At first I was getting only 08 01 00 and 09 01 00 provider id's under bell. After deleting those 09 05 00 also showed up but it still isn't working.

I have DN setup for 2 years now and thats working perfectly fine. Could you please advise me on what to do next. Thanks
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3040
Registered: Jan-08
Muzammil
load factory bin, do factory default, load last bin and rescan all sats

It seems to be the present solution for recover Viewsat
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us