How to get DN Scrambled Channels?

 

New member
Username: Rayshir

Post Number: 1
Registered: Jul-08
Hi, everyone!
I'm a new to FTA. Here's my story:

I got a new Captiveworks cw700
I found the Echo 7 (119W)
I did a auto scan and got ~300 channels
~10 are free, the rest are scrambled;

Somebody told me I should get a new bin.
I got one (1.73) and I uploaded it to receiver;
...
Did auto scan again, got !300 chaneel but none of them works, even those FTA channels.

I reloaded the old bin file posted on Captiveworks' web and I got those FTA channels back.

So my questions is what should I do to get those scrambled channel? Id new bin not enough? I saw some post mentioned "Key", what's that? what I should do to my receiver with "key"

By the way, I got a USB port and a serial dateport on receiver.

Many thanks in advance.
 

Silver Member
Username: Timscarlet

Usa

Post Number: 296
Registered: Feb-05
most captiveworks receivers needs the bin file "patch enabled" by pressing f3 on remote and then pressing 3 zero's.

make sure autoroll is on, and wait on channel one channel for at least 3-5 minutes, and picture will appear.

so i've heard...hee hee
 

Gold Member
Username: Cartier1

Post Number: 1936
Registered: Feb-07
TIM HE DID NOT EVEN BUTHER TO COME TO YOU TO SAY THANX THAT;S WHY NO MORE HELP FOR NEWSHITYBIESSSSSSSSSSSS
 

New member
Username: Rayshir

Post Number: 2
Registered: Jul-08
Sorry, I just came back. Thanks Tim.

What's going on, Cartier? Don't be so sensitive.

Another question, where to enanle the "autoroll"?

And when I press PageDown and edit the key, it won't allow me to edit the Index from 90 to 96. How to get arround ?

Many thanks in advance!

I'll go to bed soon, so apologize if I don't come back and say thanks to everybody.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us