Pansat 3000

 

New member
Username: Arableb

Post Number: 1
Registered: Jul-08
Help.....

I bought a Pansat 3000 loaded with B75, after I loaded the latest bin the remote wont work. Nothing is working what is the correct loader and file for this 3000.

arableb
 

Silver Member
Username: Metallica

Post Number: 834
Registered: Jan-08
what is Pansat 3000 is that the latest one just came out of the market that i don't know off??
all i see is Pansat this..
Pansat 250SM
Pansat 1500A
Pansat 2300A
Pansat 2500A
Pansat 2700A/E
Pansat 2800A
Pansat 3500S/SD
Pansat 5000HC
Pansat 6000HXC
Pansat 9000HD
Pansat 9200HD
 

Platinum Member
Username: Nydas

Post Number: 11155
Registered: Jun-06
Pansat 3000 is a Pansat 2500 clone and Nasser has the b75 conversion to 2700. The word "loaded" with b75 is not clear - you either bought a unit "converted" to b75 or "incorrectly loaded" with b75.
Your best bet is to
1. SAVE THE CURRENT SETTINGS AND CHANNELS USING CHANNEL MASTER. Or write them down.
2. Revert to 2500 using the Revert to 2500 kit. Use the special
2700 to 2500 Loader Converter.exe
to load the
Boot60.bin
from "ON" position. This load is extremely fast.
3. Make sure you also load X-85BL_070812_294T_api.bin
as instructed using the BL updater 1.4 and clicking on write from turning the receiver on. This is slow and you need to wait for "BURN" and reboot to "ON"
4. Then you install the b75 conversion boot-bin
jvvh_208_2500to2700.bin
using BL updater 1.4 from "ON" position. This is medium fast and ends up with b-7-5 dancing and probably going on to "ON".
This will end up in a "BURN" folowed by b-7-5 and then ON
5. Then you install the
tronicsBin276_B75.bin
This is done using BL Updater 14 and clicking "Write" as soon as you turn on the receiver.
6. You will need to do user setup and installation of sats or first use your channel master saved file and install in from "ON" position.

'PUFF links' for full kit 276 and files
http://www.savefile.com/projects/808662067

'b75' Links for full kit 276 and files '" also for 'Revert to 2500'
http://www.savefile.com/projects/808662079

Read the instructions properly in the section you have chosen.
PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS.
 

New member
Username: Svssvs

Van, BC Canada

Post Number: 2
Registered: Jul-08
Nalin
Could you help me as well,please
I have same receiver pansat 3000..Iconverted it to Puff and it was working fine up to bin Black tiger 276 came up.I loaded it and since then it only shows PUFF PUFF PUFF
Itried to put old files back on your advice ..however still rolling I tried to put Tropical 276 and Black Tiger 276 v2..still the same
I tried to reconvert to PUFF again by
Putting Boot 60 and 253 bin...same
I did not load factory bin in front of that procedure.Maybe it was my mistake...?
 

Platinum Member
Username: Nydas

Post Number: 11164
Registered: Jun-06
alex: You are heading generaly in the right direction. Once converted you do not use any "factory BINs" - the b60 is your factory BIN. You need to install the b60 bin using "revert to 2500" instructions and make sure you also install 294t bin on top of that using BL updater 1.4. Then you can proceed on to b75 or PUFF conversion.

The usual reason for b-7-5, b-7-5, b-7-5, b-7-5, or
P-U-F-F P-U-F-F P-U-F-F P-U-F-F is that you did not wait long enough for the process to finish.

DO NOT USE BLACK TYGER 276 BINs. Saif and Fwank7 in PUFF versions and tronics in b75 are OK.
 

New member
Username: Svssvs

Van, BC Canada

Post Number: 3
Registered: Jul-08
Nalin
Thank you very much for your time.
Just let me be more clear..
I have to re convert back to 2500..?
Doing that by:
1)Load b60 by 2700-2500 loader
2)Load 294t by BL 1.4 Loader
Then
3)Load Puff convertion by BL 1.4 Loader
4)Fwank 7 or Saif
Am I right..?
Do you have step by step proccedure..
I know it sound stupid but I am newbee and feel very stressful some times by doing this stuff.
Thank you again ,you are doing geat job
 

Platinum Member
Username: Nydas

Post Number: 11172
Registered: Jun-06
Just look above at my post
Posted on Sunday, July 13, 2008 - 09:40 am:
You can also download instructions from
'PUFF links' for full kit 276 and files
http://www.savefile.com/projects/808662067

'b75' Links for full kit 276 and files '" also for 'Revert to 2500'
http://www.savefile.com/projects/808662079
Read the instructions properly in the section you have chosen.
PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us