Dish down
|
Gold Member Username: SatgrlDil Mei DarD a Jaga ... Post Number: 1546 Registered: Oct-07 | dish down again on SV 4000...guess we must wait for new files |
|
Silver Member Username: LomnaPost Number: 282 Registered: Dec-07 | Yes.... you got it. Any old bin? |
|
Silver Member Username: PsychmonsterRhodium Member aint nuthin... Post Number: 848 Registered: Jul-06 | still up on pansat |
|
Bronze Member Username: ZulumonsterGaysex, Muslim Rev wright Post Number: 26 Registered: Jun-08 | Thanks Psychmonster |
|
Gold Member Username: AsharfiPost Number: 1996 Registered: Aug-06 | psychmonster, Not ALL channels are up on Pansats. Only non-international channels are working, just to let you know. |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 558 Registered: Oct-07 | Dish downnn!!!!!!!!!!! New files will be released at |
|
Silver Member Username: KingofdakingzPost Number: 276 Registered: Jun-06 | yeah dn is down |
|
Bronze Member Username: Mike2007FLORIDACITY, FLORIDA USA Post Number: 13 Registered: Oct-07 | pansat 2700a down |
|
Silver Member Username: LuciaCalgary, AB Post Number: 650 Registered: May-06 | Pansat down, internationals, ppv everything. u_u |
|
Bronze Member Username: RexandpansatPost Number: 95 Registered: Jul-06 | My VS Pro froze. Then I powered off and on. But the receiver is not booting properly (stuck in booting). Any VS Pro user experiencing this problem ? |
|
Silver Member Username: PsychmonsterRhodium Member aint nuthin... Post Number: 850 Registered: Jul-06 | yeah right, when I wrote that I still had PPVs and P-orn...now they are gone... ECM must have just started when I checked |
|
Bronze Member Username: Mike2007FLORIDACITY, FLORIDA USA Post Number: 14 Registered: Oct-07 | new files for pansat 2700a pl.thanks |
|
Silver Member Username: YomanPost Number: 126 Registered: Feb-07 | all the puff files and any other files will be released at crazyfta.n (replace the n with .com) first trust me. I've seen it for myself from the bev ecm. Go out there support their site by joining and being a member of their wonderful community. |
|
Bronze Member Username: RexandpansatPost Number: 96 Registered: Jul-06 | I was recording on external Hard Drive when ECM happened and picture froze. I powered off/on. But VS Pro got stuck in rebooting ? Any idea what to do ? |
|
Silver Member Username: YomanPost Number: 129 Registered: Feb-07 | to get the best support for your fta reciever canadian come to crazyfta.n (replace the n with .com) |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1700 Registered: Dec-06 | canadian...wait for new bin to come out then load new bin. |
|
Gold Member Username: RunnerguyPluto Post Number: 1484 Registered: Sep-06 | http://www.dntemple.com/post78250.html |
|
Bronze Member Username: JjgeePalatine, IL USA Post Number: 64 Registered: Apr-08 | Yo, Yosanth, why don't you buy it, it's only 25 bucks. |
|
Silver Member Username: YomanPost Number: 130 Registered: Feb-07 | Yo jjgee why don't you buy it's only 25 bucks |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1701 Registered: Dec-06 | hey Yosanth... Silly me for got my username and password agan for your site (crazyfta)can you email me the info or should I register again? |
|
Silver Member Username: YomanPost Number: 131 Registered: Feb-07 | Hey doreen just register again? |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1702 Registered: Dec-06 | BTW psychmonster..... did you get my PM the other week or not? |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1703 Registered: Dec-06 | okie dokie yosanth....... will do that thanks  |
|
Silver Member Username: YomanPost Number: 132 Registered: Feb-07 | np doreen.. |
|
New member Username: Hus34Post Number: 9 Registered: Aug-06 | I was just watching the burn notice marathon. Anyway |
|
Bronze Member Username: RexandpansatPost Number: 97 Registered: Jul-06 | Doreen, Thanks. I used to load new bin through USB port using MEMU. Now I cannot go to MENU. I now have to use loader and serial port. Where can I get loader ? |
|
Silver Member Username: YomanPost Number: 135 Registered: Feb-07 | you can find all the loaders for vs models at |
|
Silver Member Username: IndopakPost Number: 106 Registered: May-06 | heeelllppppp!!!!!! |
|
Gold Member Username: Way2smartWww.Desifta.com Post Number: 1650 Registered: Oct-06 | dish is down please wait for new fixes or come to [link removed] to ask for help and new files will also be available there as soon as they come out..... |
|
Bronze Member Username: ZulumonsterGaysex, Muslim Rev wright Post Number: 29 Registered: Jun-08 | Doreen likes it rough |
|
Bronze Member Username: RexandpansatPost Number: 98 Registered: Jul-06 | Thanks Yosanth. |
|
Silver Member Username: YomanPost Number: 137 Registered: Feb-07 | np.. |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1704 Registered: Dec-06 | canadian use VSPROLoader_Setup (serial port loader) pm me and i will try to email it to you |
|
Silver Member Username: YomanPost Number: 138 Registered: Feb-07 | doreen that's already at crazyfta.. dun stress too much just come to crazyfta nd relax.. |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1705 Registered: Dec-06 | Btw canadian have you try to reboot the reciever from the back switch not just the front one? That should get you out of "REBOOTING" mode I would think. |
|
Bronze Member Username: RexandpansatPost Number: 99 Registered: Jul-06 | Have tried rebooting (power OFF/ON at the back) few times. But it's stuck halfway. Remote control/Face plate switches have no effect. Seems to me loading bin using loader and serial port is my only hope. |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1706 Registered: Dec-06 | ok canadian ...I have emailed it out to you along with the factory bin and a link for new bin files. |
|
Bronze Member Username: JjgeePalatine, IL USA Post Number: 67 Registered: Apr-08 | Yo Yosanth, how about 5 bucks |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1707 Registered: Dec-06 | I re-registerd at crazy but didn't find any VS files anywhere. Am I blinde or just blonde? LOL |
|
Bronze Member Username: RexandpansatPost Number: 100 Registered: Jul-06 | Thanks for your help, Doreen. |
|
Silver Member Username: YomanPost Number: 144 Registered: Feb-07 | LMAO they aren't any vs files out..? |
|
Silver Member Username: LeafsPost Number: 617 Registered: Oct-07 | check |
|
Silver Member Username: PsychmonsterRhodium Member aint nuthin... Post Number: 851 Registered: Jul-06 | Doreen...missed it... |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1708 Registered: Dec-06 | You're welcome Canadian let me know if that helps you out any. Yosanth... I looked at ALL receiver files and didn't see any for VS at all . I went back as far as last month. psychmonster... Its ok... I was just telling you that I am not married... (referring to a previous thread) |
|
Silver Member Username: YomanPost Number: 146 Registered: Feb-07 | They weren't any viewsat files until June 23rd or sumthing.. they're no new vs files released for the current dn ecm.. |
|
Silver Member Username: RexandpansatPost Number: 101 Registered: Jul-06 | Doreen.... the loader and the factory bin that you sent me has restored my VS Pro back to normalcy (it's functional). Thanks again. |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1709 Registered: Dec-06 | Yosanth.. ok thanks for the info Canadian glad I could help |
|
Bronze Member Username: WineskmPost Number: 26 Registered: Oct-06 | It seems as though the CW700 is locked. After powering down waiting and powering back on it comes on to either 300 or 400 with a black screen and that's it. The remote won't change channels and neither will the buttons on the frontof the box. Any ideas? |
|
Bronze Member Username: Extremetester04Post Number: 15 Registered: Feb-08 | nfusion up on dish and b3v  ) |
|
Bronze Member Username: JjariPost Number: 24 Registered: Oct-07 | pls any new files for pansat ?} |
|
Silver Member Username: Jaye50Post Number: 120 Registered: Aug-07 | damn.... when they come out....they'll let you know man..... |
|
Bronze Member Username: VeryevilnipWinnipeg, Mb Canada Post Number: 12 Registered: Oct-06 | ok,so we know dish is down. vs pro is frozen on reboot screen, what now? |
|
Bronze Member Username: SlideripPost Number: 39 Registered: Jun-06 | for VS Pro , take off the coaxial cable, reboot, flash is with new file when its released. put the signal cable back on. |
|
Bronze Member Username: VeryevilnipWinnipeg, Mb Canada Post Number: 13 Registered: Oct-06 | i will try it tony,thank you! |
|
Bronze Member Username: LamborghiniPost Number: 30 Registered: Apr-08 | Any news on CW P 600 ? My remote is frozen aswell. Thanks |
|
Gold Member Username: DoreenakadjOntario Canada Post Number: 1711 Registered: Dec-06 | Lamborghini... the latest bin for CW P 600 is 193. Don't forget to use the F1 000 to activate the bins. Try to take the batteries out of the remote ... then put them back in. See if that fixes the remote problem. if not , re flash the 193 bin. Make sure you flash it in STANDBY. After you see the channel number on the front panel press the on/off button 2 times you'll see --:-- this is standby or you can use the remote on/off butten too) Sometimes things don't work out as planed so if all else fails, then start over. Install the factory boot flash then newest bin. If you want use all the long name channels for bev and dish also the icon bin I would also use the standby mode to do so. |
|
Silver Member Username: YomanPost Number: 164 Registered: Feb-07 | ALL THE PUFF B75 AND LZMA UP ON CRAZYFTA RELEASED WITHIN 20 MIN AFTER PANSAT BINS RELEASE.. COME ALL REGISTER AND ENJOY WATCHING TV......... ALL AT CRAZYFTA.. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics