Silver Member
Username: Bvvenegas

Post Number: 265
Registered: Apr-07
i just factory flashed my pansat 2700a original and im flashed my box with b75 boot and now im flashing with bin 124 am i doing it right can sombody tell me the steps to factory flash a pansat 2700a original

Silver Member
Username: Dimwitt

Post Number: 781
Registered: Aug-06
The steps are the same as any other bin you load to the 2700.

If you already have boot file b-75 on the 2700 just load the latest factory bin 124.

Bronze Member
Username: Zulumonster

Gaysex, Muslim Rev wright

Post Number: 22
Registered: Jun-08
What`s goin on

thinkin about headin over to zulu`s for beers this afternoon

sounds like good advice you got from tooter.

dont have the 2700 anymore but to find out if you have the b75 on her properly, just turn her off at the back and watch the front closely as you turn her back on, if loaded properly it will say b75 as it comes on. If not then you need to load it again. after that your latest bin.

memory serves me that for the one time b75 softwear your unit must be turned on/plugged in, plus on at the front.

Bronze Member
Username: Similarevil

Post Number: 38
Registered: Apr-08
i wouldnt if i was you....he now has legal issues to think about...
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us