PUFF

 

Bronze Member
Username: Kildonan

Philadelpia, Pa Usa

Post Number: 50
Registered: Feb-08
Casn someone please assist me in converting my 2700 A to puff/ Thank you
 

Silver Member
Username: Metallica

Post Number: 775
Registered: Jan-08
here...C\P

Here is the new PUFF 253 bin for those who want to start converting to PUFF now.

Also is the Loader and Boot60 zip.

In that zip file is the 2700 to 2500 convertor loader by Chancysand as well as the boot60 bin file.

Jvvh_Fortec-Pansat_CanAm_(PUFF)_253(640k) bin is the "MUST LOAD FIRST BIN" to get you converted to PUFF.




How to Load.

Open 2700 to 2500 Loader Converter.

Click Bin File, choose Boot60.

Turn reciever ON.

Let reciever fully boot up ,soon as you see ON hit Download.

Write will complete in 10-15 seconds.
Reciever will self reboot with knight rider dash (- - - -) rolling across display screen.

LEAVE RECIEVER ON DO NOT TURN IT OFF.

Open FortecStarSTB loader or whatever Loader you use before.
Load Jvvh_Fortec-Pansat_CanAm_(PUFF)_253_(640K) bin.
Hit Download.

After download complete reciever will pause on dash.
Reciever will self reboot to knight rider dash (- - - -) "again".
It will pause on 4th dash for 3-5 minutes DO NOT reboot reciever LEAVE it alone.

Reciever then will self reboot with P U F F _ P U F F then pause on F for 30 seconds then display ON.


U Done now you're a PUFF.
 

Platinum Member
Username: Nydas

Post Number: 10888
Registered: Jun-06
A genuine Pansat 2700A or a clone Pansat 2700A CANNOT be converted to PUFF.
A Pansat 2500 or FLU converted to work like a Pansat 2700 may be converted to PUFF.
 

Silver Member
Username: Metallica

Post Number: 776
Registered: Jan-08
Nalin..good point...i forgot about that.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us