Hi: I did a search but was unable to come up with any definite solution that somebody has tried/worked. So please respond
My setup is:
Dish pro 500 with a twin lnbf fortec star 30in dish with a dual lnbf (says good for directv etc) it does not have a name on it.
The Dishpro 500 has 2 cables going to a diSEqc 4*1 switch. 119 to port 1 and 110 to port 2 The cable from the 30in dish is connected to port 3 (echo 3, 61.5) Now the switch output is taken to my Sonicview 4000 receiver. I have been using this for several months now and receiving all three 119, 110 and 61.5 However, I have a Pansat 3500 that I want to connect in another room with independent channel capabilities so that I don't have to watch the same stuff as the other one etc. I would appreciate your advice on how I can accomplish this task in the simplist and best way. Remember: I have Dishpro 500 Twin lnbf not Dishpro plus. The other Dish and lnbf are not Dishnet stuff.
