Bev assistance needed


Bronze Member
Username: Jryevols

Little rock, Arkansas USA

Post Number: 77
Registered: Mar-07
I have three sat. one on 110 one on 119 and the other on bev. The signals on the 110 and 119 are strong , ant the one on bev was great until the latest bin change. Since the change I get nothing and the dish has not moved.The other two sats are the same strength. What can I do to get the bev back it is located on disq.3 the others on 1 and 2. Could I have switch problems

Platinum Member
Username: Nydas

Post Number: 10603
Registered: Jun-06
Temporarily software disconnect the port 1 and 2 in the Antenna setup, and then scan DiseqC 3.

Gold Member
Username: Saqeeb9000

Post Number: 3326
Registered: Oct-07
yeh nalin's way should work.

Silver Member
Username: Luser

Post Number: 278
Registered: Nov-07
Hardboot only.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us