Not getting all the channals on View5at Pr0

 

Silver Member
Username: Nyc_alien

Staten island, Ny Us

Post Number: 116
Registered: Dec-04
Hello all,

I use a view5at Pr0 and I'm not getting all the channels on DN even after a blind scan. Is there any settings that I have to setup before scan. Also where I can find a good channel list for DN? I'm using single LNB for each sat.
 

Gold Member
Username: Kirankumar

NO Bashing

Post Number: 2738
Registered: Oct-07
make sure your antenna settings are correct,and try not to do blind scan on vs
it is better to do auto scan,but you need to check antenna setting,if not sure you can post them here so we can help
 

Silver Member
Username: Nyc_alien

Staten island, Ny Us

Post Number: 117
Registered: Dec-04
rough antenna settings are

LNB - single
Frequency - 11250
Network - on
LNB frequency - 12229
 

Gold Member
Username: Kirankumar

NO Bashing

Post Number: 2741
Registered: Oct-07
lnb fer should be 11250
and TP freq should be 12224

do you just have 1 sat?
 

Bronze Member
Username: Nqarni

Post Number: 33
Registered: Feb-08
I am also not getting Max, Set USA and TV Asia on VS Ultra since last bin uploaded
 

Silver Member
Username: Tinfish

Post Number: 147
Registered: Apr-06
1 11715 20000 V 3/4
2 12872 20000 V 3/4
3 11745 20000 V 3/4
4 12842 21500 V 2/3
5 11776 21500 V 2/3
6 12811 20000 V 3/4
7 11806 20000 V 3/4
8 12781 21500 V 2/3
9 11837 21500 V 2/3
10 12750 21500 V 2/3
11 11867 21500 V 2/3
12 12720 21500 V 2/3
13 11928 21500 V 2/3
14 12659 21500 V 2/3
15 11959 20000 V 3/4
16 12628 21500 V 2/3
17 11989 20000 V 3/4
18 12598 20000 V 3/4
19 12567 20000 V 3/4
20 12050 20000 V 3/4
21 12537 20000 V 3/4
22 12081 20000 V 3/4
23 12506 20000 V 3/4
24 12111 20000 V 3/4
25 12476 20000 V 3/4
26 12142 20000 V 3/4
27 12445 20000 V 3/4

Once you've done this, scan the sat and you should have about 130 channels.
 

Silver Member
Username: Tinfish

Post Number: 148
Registered: Apr-06
Sorry I meant to say.....

Add the TPs exactly as it shows below:

1 11715 20000 V 3/4
2 12872 20000 V 3/4
3 11745 20000 V 3/4
4 12842 21500 V 2/3
5 11776 21500 V 2/3
6 12811 20000 V 3/4
7 11806 20000 V 3/4
8 12781 21500 V 2/3
9 11837 21500 V 2/3
10 12750 21500 V 2/3
11 11867 21500 V 2/3
12 12720 21500 V 2/3
13 11928 21500 V 2/3
14 12659 21500 V 2/3
15 11959 20000 V 3/4
16 12628 21500 V 2/3
17 11989 20000 V 3/4
18 12598 20000 V 3/4
19 12567 20000 V 3/4
20 12050 20000 V 3/4
21 12537 20000 V 3/4
22 12081 20000 V 3/4
23 12506 20000 V 3/4
24 12111 20000 V 3/4
25 12476 20000 V 3/4
26 12142 20000 V 3/4
27 12445 20000 V 3/4

Once you've done this, scan the sat and you should have about 130 channels.
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 2222
Registered: Jan-08
Nyv alien
you can do a blind scan without problem with this bin, this bin erase double channels.
If you use port 1 changed it for port 3 or 4 and try with different LNB Type like Standard.
Good luck
 

Silver Member
Username: Nyc_alien

Staten island, Ny Us

Post Number: 118
Registered: Dec-04
I actually did blind scan and it actually 4 of each channels instead of 2. But only 1 is working. However I will try what you guys suggesting.
 

Silver Member
Username: Nyc_alien

Staten island, Ny Us

Post Number: 119
Registered: Dec-04
Is there a different between a standerd LNB and Di5h pro LNB ?
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 2224
Registered: Jan-08
Nyc
Which LNB you have?
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 2225
Registered: Jan-08
write sat config and go to installation menu and select "channel scan and delete sat with garbage can
save it and reconfig sat and do a blind scan.
Good luck
 

Silver Member
Username: Nyc_alien

Staten island, Ny Us

Post Number: 120
Registered: Dec-04
I have standard single.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us