My guide seems to be infected or something.Whenever I press guide button, it distorts background to where I cant read it. It also affects the menu, info and title screens but this only happens if i press guide. If i dont press guide then everything works fine. Any help would be appreciated! thanks
john doe try it: try it: All viewsat box "Write your sat info before" Go to Code menu Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00 Delete this 3 provider one by one with F3 on remote "NEW" do same thing with all provider on Bev provider 09 07 00 09 06 00 09 05 00 09 01 00 08 01 00 no need to delete keys switch off 10 secs on back panel "New" do a factory default and load last bin for your box turn autoroll on Keep on Bin and autoroll regenerete keys Resolve problem with lost channel , autoroll, freeze and search signal
Do setup on each sat and auto scan on each sat after for recover all channel "Dont do a blind no need" "Dont load factory bin"
Thats erase bad data in the box For box who lost channel and sat setup ENJOY TV
TESTED and work fine New issue for problem on Viewsat Thanks
hey plymouth. i have been having an auto toll problem since last week from before the emc. i tried everything new defaults, ect.. i took your advise this am. good news is that yes the codes did roll back. but i still get ' auto roll processing" on the screen. dude all the channels are in as per evidence in guide. channel 100 shows pictures and sound of top 6 channels. but nada, nothing zippo. i turned the box off and have it on channel 122. and its been rolling for 10 minutes now.. my pansat recently died and i had this viewsat as a back up from last summers long emc.\ any suggestions??
plymouth, Thanks for the help! I followed your instructions and now everything works perfectly! No scrambled screens and now I dont even get "No Info" on my guide! All movie title come right up! Thanks again!
All viewsat box "Write your sat info before" Go to Code menu Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00 Delete this 3 provider one by one with F3 on remote "NEW" do same thing with all provider on Bev provider 09 07 00 09 06 00 09 05 00 09 01 00 08 01 00 no need to delete keys switch off 10 secs on back panel "New" do a factory default switch off 10 secs on back panel and load last bin for your box switch off 10 secs on back panel turn autoroll on Keep on select channel 200 CNN if you have it. Bin and autoroll regenerete keys Resolve problem with lost channel , autoroll, freeze and search signal
Do setup on each sat and auto scan on each sat after for recover all channel "Dont do a blind no need" "Dont load factory bin"
turn autoroll on Keep on Bin and autoroll regenerete keys Resolve problem with lost channel , autoroll, freeze and search signal
Do setup on each sat and auto scan on each sat after for recover all channel "Dont do a blind no need" "Dont load factory bin"
